Thoughts after 1 month of ownership

[Cormanus]

Why does it always have to be me? Desert Viper, is that really the right kit for a BMW? I mean, it will improve its appearance no end, but will it fit without an awful lot of work?

[Lord Popgun]

Turn signals. Ferret didn’t like them either on his ‘14 Deluxe and so changed out the switch gear for the ‘13 switch gear. Ask him for more detail if interested.

[flynrider]

Yep. If you've been riding Honda's, the switch gear was virtually the same for 20+ years....until 2014. I have a '13 that has the same switch cluster as my '93 CB750. I think if I got a '14 or later, I'd have to swap out the switches. 25 years of muscle memory doesn't easily change.

[Desert viper_imp]

Why does it always have to be me? Desert Viper, is that really the right kit for a BMW? I mean, it will improve its appearance no end, but will it fit without an awful lot of work?

Yeah, with a couple of tweaks here and there

[Cormanus]

Why does it always have to be me? Desert Viper, is that really the right kit for a BMW? I mean, it will improve its appearance no end, but will it fit without an awful lot of work?

Yeah, with a couple of tweaks here and there

Yeah, with a couple of tweaks here and there
That's OK then. Phew!

[Houtman_imp]

I for one switched my 2013 turn signals / horn to the same set up as my 14 and 17. It feels much more natural to me to have the turn signal button close to my thump , you will use the turn signal far more often than your horn.

[peterbaron]

You’re going to love your Whitehouse tank & covers....awesome quality!

......so, where is the rest of the bike?????



pb

[LouA_imp]

tommymck, Try Simple Green "Mag Wheel" cleaner on your rear wheel. It works great. Note this is not regular Simple Green cleaner but specifically for mag wheels. I would think it would work fine for your wire wheels too. Good luck.

[Desert viper_imp]

You’re going to love your Whitehouse tank & covers....awesome quality!

......so, where is the rest of the bike?????



pb

......so, where is the rest of the bike?????
Everything is still in boxes including the spoked wheels and new Metzlers....I injured my shoulder in Idaho last year and had to have rotator cuff surgery here in California last February.....so I’ll probably install everything next November when we return from Idaho....it still looks like this....( a beautiful bike!)


pb

[Dave Swanson]

I’ve had my 2017 CB1100EX for about a month and I thought I’d write up my impressions so far….the good, the bad and the ugly. Starting with the ugly, I’ve got nothing. The bike is beautiful. I had the opportunity to essentially get half-off with a new old stock 2014 in black, but the cosmetics of the 2017 in red made it worth it for me to spend the extra dough. Financially, that doesn’t make any sense, but the red and spoked wheels just do it for me. The looks of the bike are second to none to me.

There isn’t much bad either, but there are a couple of things that aren’t ideal for me. First, I plain don’t get along with the ergonomics of the turn signal switch. It’s just a niggle to be sure, but I always seem to be fishing for the thing unless I look down to see it. And you can’t easily use it while working the clutch. Second, I wish 6th was geared lower (or is it higher…I always get it wrong….) There is just a couple of hundred RPM drop between 5th and 6th. The bike has plenty of low end torque, and at highway speeds, I’d prefer that it rev’d lower in 6th. If I’m going to accelerate to pass, I’m shifting down to 5th anyway, so having 6th geared higher (or is it lower) doesn’t buy much. And although I love the looks of spoked wheels, I’m a bit of a neat freak. The front wheel is fine, but the rear wheel, with whatever the chain throws back, is a bit more of a pain to keep clean.

Finally, now for the good. It shouldn’t matter so much but looks are just fantastic. Also, the riding position is perfect for the type of bike that the CB is. I thought that I’d try to optimize comfort by trying an aftermarket peg kit that gives adjustability on the peg position. That was a $200 mistake. None of the positions beat the stock pegs and the aftermarket pegs weren’t as comfortable in any position. Generally speaking, the bike is as comfortable, fun and functional as it can possibly be. I thought that I’d end up getting a fairing but at speeds of up to 70mph at least it does great. I’d be concerned that a fairing would cause more trouble than it would be worth.

I mainly use the bike (or any bike for that matter) as a daily commuter when the weather is nice and to tool around evenings and weekends. Typical day is 30 miles at most. I did do a 200-mile day touring locally though and three hours in the saddle was no problem at all. Also, I’ve heard complaints about the suspension, but I’m assuming that these were from earlier models because the suspension on my bike is perfect. I wouldn’t change a thing.

What will I change / modify? Good sense would suggest that I do nothing at all. But I did order the Whitehouse tank and covers in red from Samurider. I really do love the stock look, but I like the idea of switching between stock and retro. It’s an expensive indulgence to be sure. I’ll see if it’s worth it. For anybody interested, I’ll post pics of the swap-out procedure. There are a couple of posts here that touch on it, but I didn’t see a descriptive how-to.

Lots of rain here on the East Coast the past few weeks, but I’ve managed to get some riding in more days than not.

I am very interested in seeing the swapout of the tank and covers. They look amazing!