Login

CIP57_imp · 10-24-2013, 05:16 AM

Just returned from a 150mi ride this morning. Not an iron butt run but enough for a good review.

Workmanship:
Seat is perfectly balanced and the vinyl and seams is much better than stock. The look of the seat is much richer. Its on the original seat pan so no issues with fit. After discussion with Seth I decided to go with vinyl because i use a tunnel bag which would show less wear than leather. Under his recommendation i also went with seams on top instead of smooth which gives a bit more. I like the looks of the seat more than my stock seat. If you didn't know the bike you would think it came with a great looking seat. Please feel free to be honest with your opinion.

Comfort:
Amazing!! I felt the same after the ride as i did before i left. Usually about 50-70 miles in I'm feeling discomfort. Don't understand why Honda doesn't put concave seats on touring bikes. Its firmer than stock but not as hard as a Corbin. Bumps are encouraged, in plants you deeper into the pocket.

Edit: the cost was $ 284.00

What more can i say the guy knows how to make a seat comfortable.

HikerToo_imp · 10-24-2013, 05:26 AM

I guess like the Corbin, it encourages you to sit back a little from the tank, kinda into the "pocket" of the seat?

CIP57_imp · 10-24-2013, 05:34 AM

(10-24-2013, 05:26 AM)HikerToo_imp Wrote: I guess like the Corbin, it encourages you to sit back a little from the tank, kinda into the "pocket" of the seat?

Mine is up 1 1/2 inches from stock. You tape out the back and sides for the perfect pocket. That's why i didn't go with Corbin, i have had 4 seats made by them and they always go back for adjustments. This is a very personal fitting with pic's. Pocket is right were it should be.

SanPete_imp · 10-24-2013, 08:01 AM

(10-24-2013, 05:16 AM)CIP57_imp Wrote: Just returned from a 150mi ride this morning. Not an iron butt run but enough for a good review.

Workmanship:
Seat is perfectly balanced and the vinyl and seams is much better than stock. The look of the seat is much richer. Its on the original seat pan so no issues with fit. After discussion with Seth I decided to go with vinyl because i use a tunnel bag which would show less wear than leather. Under his recommendation i also went with seams on top instead of smooth which gives a bit more. I like the looks of the seat more than my stock seat. If you didn't know the bike you would think it came with a great looking seat. Please feel free to be honest with your opinion.

Comfort:
Amazing!! I felt the same after the ride as i did before i left. Usually about 50-70 miles in I'm feeling discomfort. Don't understand why Honda doesn't put concave seats on touring bikes. Its firmer than stock but not as hard as a Corbin. Bumps are encouraged, in plants you deeper into the pocket.

Edit: the cost was $ 284.00

What more can i say the guy knows how to make a seat comfortable.

Targeted demographics lack of buttocks mass? Blush

Jwayne_imp · 10-24-2013, 08:02 AM

(10-24-2013, 05:16 AM)CIP57_imp Wrote: Just returned from a 150mi ride this morning. Not an iron butt run but enough for a good review.

Workmanship:
Seat is perfectly balanced and the vinyl and seams is much better than stock. The look of the seat is much richer. Its on the original seat pan so no issues with fit. After discussion with Seth I decided to go with vinyl because i use a tunnel bag which would show less wear than leather. Under his recommendation i also went with seams on top instead of smooth which gives a bit more. I like the looks of the seat more than my stock seat. If you didn't know the bike you would think it came with a great looking seat. Please feel free to be honest with your opinion.

Comfort:
Amazing!! I felt the same after the ride as i did before i left. Usually about 50-70 miles in I'm feeling discomfort. Don't understand why Honda doesn't put concave seats on touring bikes. Its firmer than stock but not as hard as a Corbin. Bumps are encouraged, in plants you deeper into the pocket.

Edit: the cost was $ 284.00

What more can i say the guy knows how to make a seat comfortable.

My seat from Seth has worked out great, gets more comfortable with each ride.

CB4ME_imp · 10-24-2013, 08:06 AM

CIP - great reveiw, great pictures, great price!

the Ferret · 10-24-2013, 08:08 AM

I don't think the look suits the style of the bike like the original, but it probably would suit your butt better. It is a good looking seat and the price is killer.

CIP57_imp · 10-24-2013, 08:20 AM

(10-24-2013, 08:02 AM)Jwayne_imp Wrote:
(10-24-2013, 05:16 AM)CIP57_imp Wrote: Just returned from a 150mi ride this morning. Not an iron butt run but enough for a good review.

Workmanship:
Seat is perfectly balanced and the vinyl and seams is much better than stock. The look of the seat is much richer. Its on the original seat pan so no issues with fit. After discussion with Seth I decided to go with vinyl because i use a tunnel bag which would show less wear than leather. Under his recommendation i also went with seams on top instead of smooth which gives a bit more. I like the looks of the seat more than my stock seat. If you didn't know the bike you would think it came with a great looking seat. Please feel free to be honest with your opinion.

Comfort:
Amazing!! I felt the same after the ride as i did before i left. Usually about 50-70 miles in I'm feeling discomfort. Don't understand why Honda doesn't put concave seats on touring bikes. Its firmer than stock but not as hard as a Corbin. Bumps are encouraged, in plants you deeper into the pocket.

Edit: the cost was $ 284.00

What more can i say the guy knows how to make a seat comfortable.

My seat from Seth has worked out great, gets more comfortable with each ride.

My seat from Seth has worked out great, gets more comfortable with each ride.
Thx J for the contact it worked out well.

(10-24-2013, 08:08 AM)The ferret_imp Wrote: I don't think the look suits the style of the bike like the original, but it probably would suit your butt better. It is a good looking seat and the price is killer.

I hear you Mickey, but its has to fit my ass Smile

CIP57_imp · 10-25-2013, 12:45 AM

(10-24-2013, 05:26 AM)HikerToo_imp Wrote: I guess like the Corbin, it encourages you to sit back a little from the tank, kinda into the "pocket" of the seat?

Here's a pic of the corbin and my seat, you can see off the frame and side cover the pocket difference of about 2 1/2 inches.

Red1100_imp · 10-25-2013, 02:27 AM

Seat looks great. Does Seth have a web site? It looks like you sit lower on the Lamm seat, is that correct? Would the price vary much with leather?

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	custom seat by Mr. Ed's Moto	tdbru	8	550	09-20-2025, 09:21 AM Last Post: tdbru
	Hagon Rear Shock Review	dUh!_imp	2	409	09-18-2022, 10:55 PM Last Post: KiowaEagle_imp
	Samurider Paniers-review + pictures	tomas_imp	76	4,923	05-03-2022, 02:35 PM Last Post: ChiefJP_imp
	Custom Exhaust	bnhanneman_imp	26	1,497	03-12-2022, 06:03 AM Last Post: PowerDubs_imp
	Custom saddle... gel or no gel?	alexzanutto_imp	19	1,284	07-25-2021, 11:29 AM Last Post: Houtman_imp
	Daytona Cozy Seat - A Review	motoWest_imp	11	795	06-06-2021, 06:09 AM Last Post: JLEECB
	improved seat and 3 cm higher SEAT. the best reform	Alfgaxatico_imp	1	263	04-25-2021, 04:47 AM Last Post: GoldOxide_imp
	Dart Marlin Flyscreen - A Quick Review	the_undecider_imp	70	4,729	12-10-2019, 02:16 PM Last Post: jimgl3_imp
	Custom lavalier mic setup for GoPro vids…	Guaza14_imp	8	552	07-17-2019, 03:11 PM Last Post: max
	Custom paint and body work pricing	misterprofessionality	3	376	04-30-2019, 05:09 AM Last Post: spartanheed_imp

Threaded Mode Review on Seth Laam Custom Seat
Author	Message