Login

redbirds_imp · 02-11-2014, 06:17 AM

My Puig came with two small adhesive felt pads that you can mount on the instruments where they may contact. I used them as I pulled my screen back close to the pod.

dBuster_imp · 02-11-2014, 06:32 AM

So then it sounds like puig screen owners are happy with them?!

Sent from my XT1055 using Tapatalk

dBuster_imp · 02-11-2014, 02:51 PM

Okay after looking into this and going to monsterparts.com I see that have the puig plus that doesn't list our bike and is listed under the 8 inch headlight group.

They do have the puig stream which lists our bike...
http://www.monsterparts.com/p/5022/Puig+...creen.html

Not of course shown on a cb1100 but you get the idea.

Or the plus...

Which is recommended? The plus or the stream?

Sent from my XT1055 using Tapatalk

Rolls_imp · 02-11-2014, 04:41 PM

The Plus. Other doesn't seem a good fit for our headlight or gauges.

dBuster_imp · 02-11-2014, 11:31 PM

(02-11-2014, 04:41 PM)Rolls_imp Wrote: The Plus. Other doesn't seem a good fit for our headlight or gauges.

I wish they had an image of that other one on a normal bike not a scooter... I might try contacting them to ask...

Actually went to the puig website and saw a better picture, unfortunately not on a bike but a better image. They actually have a couple that caught my eye... Wish I could remember the model names, will have to go back and get them..

Sent from my XT1055 using Tapatalk

pwyakjr@stny.rr.com_imp · 02-12-2014, 04:47 AM

i too installed the smoked puig plus. i'm very happy with it also. i'm 5'7" tall and it was just right. i installed the mounting bracket inside the headlight mount and it has never moved. just get one and you won't be disappointed. i've done about 1,000 miles with it on and will not take it off.

Rolls_imp · 02-12-2014, 05:37 AM

I've mentioned that the Puig Plus works well for me, but I hadn't mention my size. I'm 5'9" 185 lb. and my jeans are 30" inseam. Blocks the chest, no buffeting on the helmet. I hate buffeting.

dBuster_imp · 02-12-2014, 06:32 AM

Yeah, I am 6'1" tall so it would be different for me I am sure...

Sent from my XT1055 using Tapatalk

emptysea · 02-12-2014, 07:37 AM

I'm 6'1, but with a 32" inseam. I guess that means that Rolls and I are pretty close in upper body height. I hope so, cuz I'm going with the Puig.

dBuster_imp · 02-12-2014, 11:38 AM

(02-12-2014, 07:37 AM)EmptySea_imp Wrote: I'm 6'1, but with a 32" inseam. I guess that means that Rolls and I are pretty close in upper body height. I hope so, cuz I'm going with the Puig.

Let me know how it is for you. I to have the 32" inseam and the 6'1" frame..

Sent from my XT1055 using Tapatalk

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	to puig or not to puig (or, which Puig screens fit ?)	j3gq_imp	53	3,454	05-30-2022, 04:13 AM Last Post: j3gq_imp
	MRA Vario-screen	ChiefJP_imp	6	610	05-11-2022, 01:07 PM Last Post: GoldOxide_imp
	Puig Vision Windscreen	Interceptor Pilot_imp	5	541	03-03-2022, 08:39 AM Last Post: GoldOxide_imp
	Puig now listing the CB1100	CB4ME_imp	8	637	01-24-2022, 04:34 AM Last Post: j3gq_imp
	Puig Plus install question	Rolls_imp	16	1,263	01-24-2022, 04:33 AM Last Post: j3gq_imp
	Puig Windscreen Quality	Skypilot_imp	13	885	11-01-2019, 11:43 AM Last Post: MWV1500_imp
	Road Comet II: Puig Clip-on Visor?	Townie_imp	5	453	08-10-2019, 05:16 AM Last Post: warman_imp
	Winter mods complete - screen/bars/grab rail/saddlebag	TPK12_imp	4	595	04-08-2019, 12:41 PM Last Post: GoldOxide_imp
	Dart Marlin Fly screen	Ennsync_imp	19	1,257	12-26-2018, 02:51 AM Last Post: GoldOxide_imp
	Dart Fly screen	chandler_imp	6	446	11-03-2018, 11:22 AM Last Post: Doug Shepard_imp

Threaded Mode Puig Plus Screen
Author	Message