Honda Project bike thoughts?

[bflint]

Love my `14 CB1100DX, but looking for some additional entertainment. Thought about getting a Honda project bike to inspire and aggravate me. When I just got back into cycle in 2015, bought a unblemished `93 750 Nighthawk that went directly to cycle shop for 6 months of repairs … bought my CB1100 while waiting the 6 months. I only did a little scavaging for the 750, so I really have no project bike experience.
*
Anybody have any suggests for where to look for a project bike and what model? Love the v45 and v65 and cx500, but not many around. Thought maybe something between 400cc and 900cc, but guess anything could work. Probably most expensive thing will be tools, plus have to kick my wife out half the garage … its mine right ?

[Chuckk_imp]

take a good look at parts availability for what ever bike you choose..

[2017EX_imp]

If you have no previous project bike experience, you might want to consider starting with something smaller, and relatively more simple. For example something in the mini trail series of Honda bikes, Z50 or CT70. All the basic principles will be the same as in larger bikes, it will still be challenging/rewarding as an experience, but also easier to handle as a first time project.

[Chuckk_imp]

I am not too sure about that approach.. I have done over 120 bikes, just as a hobby.. I found the smaller ones don't sell for as much as the larger ones when completed, but have basically the same costs and labor involved.. not that you are doing it for the money, but it is always a consideration..

[pekingduck]

A project Honda sounds like fun. I like the 1978 and later Honda 400 and 450 Hawk/CM series. They are generally reliable, very easy to work on, have good parts availability, and inexpensive.
I'd stay away from the v-twins and v-fours because the carbs are more difficult to work on.

[Chuckk_imp]

my favorites were Honda goldwing 1000's and 1100's .. carbs are the main cause of failures.. learn them and life will be good.. they are more of an old man's bike and they will not be as thrashed as others.. good parts availability ..

[teamvisegrip_imp]

I agree with 2017EX... Start with a small bike and learn the basics. A small bike is easy to repair and less moving parts as a multi cylinder bike. A 2 Stroke is a lot easier than a 4 Stroke. I like the pre 70s bikes myself. Yes there is not a huge profit in a small bike but if done right you can make some cash. Cleaning and setting multi carburetor bikes is not easy for the beginner.

Here is the best bit of advice I can give... Buy only unmolested bikes as you do not want someone else's mistake. Get complete non runners and just make the repairs and sell. Most times the non runners just need simple maintenance to get them going. Most times it is a dirty fuel system. Titles are a must for me now. KNOW WHEN TO STOP! Do not get po'd and keep throwing money at the bike turning it into a "Money Pit"!

The Comprehensive Vintage Motorcycle Price Guide helps to give you an estimate of the value of the bike but it is not a guarantee of value. Also getting the Honda ID guide is a help too. I have ID Guides for the Honda, Suzuki and Kawasaki bikes and use them all the time to identify the bike I am buying.

[Bheezy27403_imp]

That's funny. You can't throw a rock around here without hitting a CX500 for sale. They're everywhere. Agree with Duck that the CM series are good basic bikes to start with. My first streetbike was an '80 400CMt. Very easy to work on and build confidence. Very reliable bikes with tons of parts to find easily.

[Chuckk_imp]

didn't some of those cx500's have water pump troubles.. I barely can remember.. I had a couple of them ..

[Bheezy27403_imp]

I seem to recall hearing they have issues. Never had one or know anybody that has. But there have been a few for sale around recently.