Login

Tripod_imp · 01-11-2016, 10:18 PM

(01-11-2016, 10:29 AM)Jim21680_imp Wrote: Nemo, are you cross-shopping the two?
In my opinion, it's a fairly simple (but perhaps not easy) choice; if you like a cone-shaped pipe, the Arrow. For a more tubular design, Staintune.
There may be very slight differences in the way they sound, but I can basically guarantee that whatever you choose, you will like it.

If I were going to cross shop exhaust pipes, the first thing I would do is check with Bruce Jenner. I understand he is a quite adept at cross shopping headers, pipes, etc...

(I couldn't help it folks Angel

, my apologies if I offended anyone.)

P.S. I have a Staintune. I really like the sound. Have Arrows on a couple of my Triumphs.

Chris

jrns_imp · 01-12-2016, 02:46 AM

(01-11-2016, 04:19 PM)MikeOxbig_imp Wrote: I have the Arrow and I'm very happy with it. Great sound, looks, quality and it's smaller/lighter than stock. I like the Staintune a lot as well and definitely could have gone either way. The Arrow does cost less.

Another (minor) benefit of the Arrow is that you have the choice to keep the quiet baffle in or out of the muffler so you can pick the noise level.

that's good to know on the Arrow- is it easy to swap the baffle out? thanks for sharing.

MikeOxbig_imp · 01-12-2016, 05:36 AM

jrns, it's very easy to remove the quiet baffle. First, you have to break this small welded tab (size of this small circle: O), I just used a screwdriver and knocked it off. Then you use a snap-ring plier to remove the snap-ring. After removing the snap-ring, you can use pliers to pull out the baffle.

jrns_imp · 01-12-2016, 07:03 AM

(01-12-2016, 05:36 AM)MikeOxbig_imp Wrote: jrns, it's very easy to remove the quiet baffle. First, you have to break this small welded tab (size of this small circle: O), I just used a screwdriver and knocked it off. Then you use a snap-ring plier to remove the snap-ring. After removing the snap-ring, you can use pliers to pull out the baffle.

thanks for that!
a slip on (possibly an arrow) is another mod on my list...I better start buying lottery tickets Wink

Guth_imp · 01-12-2016, 02:57 PM

Something that really appealed to me about the Staintune other than the tone of the exhaust note (which is excellent) was the fact that it never needs repacking. This also allows them to pull off such beautiful construction without the use of rivets.

That said, the price was definitely on the high side and it was perhaps the only thing that I can remember owning that when asked "why" by my wife I couldn't even attempt to explain. "Just because I wanted it" isn't exactly a selling point, lol.

Nemo_imp · 01-12-2016, 11:53 PM

Pterodactyl_imp · 01-13-2016, 08:47 AM

(01-12-2016, 02:57 PM)Guth_imp Wrote: Something that really appealed to me about the Staintune other than the tone of the exhaust note (which is excellent) was the fact that it never needs repacking. This also allows them to pull off such beautiful construction without the use of rivets.

That said, the price was definitely on the high side and it was perhaps the only thing that I can remember owning that when asked "why" by my wife I couldn't even attempt to explain. "Just because I wanted it" isn't exactly a selling point, lol.

It may not be as expensive as you think. As Cormanus and I have suggested in other threads, check the cost of a direct order from Australia as opposed to buying from the, perhaps aptly named, "Pirates Lair". The AUD (sometimes known as the South Pacific Peso) has now fallen below USD .70.

Cheers

Look at: [url=http://cb1100forum.com/forum/showthread.php?tid=7055]THIS THREAD

**Cormanus** · 01-13-2016, 07:12 PM

(01-13-2016, 06:16 AM)Huladog_imp Wrote: Well I DID place an online order on 12/21/15 and they did confirm the order back to me, but after that I haven't heard a peep out of Staintune.

No tracking number, etc.

So I've been replying to their email to get an update, as of 1/13/16 not a word.

Any of you guys in Australia know what's up with Staintune? If they don't reply I'm going to have to cancel my order, get a refund via PayPal and probably order a Moriwaki from our friends in Japan.

Aloha,
Huladog

But then this is a bit alarming. I'm not in Australia, Huladog, or I'd call them for you.

Pterodactyl_imp · 01-13-2016, 07:29 PM

Cormanus, you've shamed me. 'Dog, PM me with your order details if you would like me to chase it up.

Cheers

Huladog_imp · 01-14-2016, 05:15 AM

Pterodactyl, PM sent!

Mahalo,
Huladog

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	need help installing slip on exhaust nw suburb, IL	jm0327_imp	18	1,211	10-25-2024, 12:12 PM Last Post: iamheero_imp
	Exhaust system/slip-on	johnny_elpino_imp	26	1,596	05-26-2023, 01:06 AM Last Post: kzoorue_imp
	Arrow Slip-On Thoughts	le_penseur_imp	84	3,795	05-15-2023, 05:20 AM Last Post: mrded_imp
	Arrow exhaust.	Mixagon_imp	11	703	10-25-2022, 01:56 AM Last Post: ymtnpoah11_imp
	Arrow full exhaust	gretle_2.0	2	259	05-17-2022, 11:38 AM Last Post: GoldOxide_imp
	delkevik slip on mufflers	outback_imp	4	419	10-14-2021, 12:44 AM Last Post: outback_imp
	loose the arrow	jimgl3_imp	33	1,538	08-30-2021, 11:14 PM Last Post: the Ferret
	Delkevic Muffler slip-on	wgscheib_imp	2	268	06-08-2021, 01:48 AM Last Post: GoldOxide_imp
	Arrow slip on mufflers	DougsZ28_imp	15	931	05-13-2021, 04:09 AM Last Post: PowerDubs_imp
	Another Driving Light thread (Black Oak LED)	bflint	10	721	08-18-2020, 04:20 AM Last Post: bflint

Threaded Mode THE DEFINITIVE STAINTUNE vs. ARROW SLIP-ON EXHAUST THREAD!!
Author	Message