Login

White Dog_imp · 01-23-2016, 03:44 AM

Ordered a pair of the quick mount gaiters from Revzilla this morning. Made by Kijima. I had some "zilla bucks" to burn so I expect them sometime next week.

Dvassino_imp · 01-23-2016, 05:16 AM

I purchased a pair of those too. Installed them on my 2014 Standard. They look pretty good but I'm not sure how to keep the seam together. You can't tell they are split from the side view if you twist the seam inward. Let me know what you think. They are very beefy and seem excellent quality.
Dino

(01-23-2016, 03:44 AM)White Dog_imp Wrote: Ordered a pair of the quick mount gaiters from Revzilla this morning. Made by Kijima. I had some "zilla bucks" to burn so I expect them sometime next week.

White Dog_imp · 01-23-2016, 08:18 AM

(01-23-2016, 05:16 AM)Dvassino_imp Wrote: I purchased a pair of those too. Installed them on my 2014 Standard. They look pretty good but I'm not sure how to keep the seam together. You can't tell they are split from the side view if you twist the seam inward. Let me know what you think. They are very beefy and seem excellent quality.
Dino

(01-23-2016, 03:44 AM)White Dog_imp Wrote: Ordered a pair of the quick mount gaiters from Revzilla this morning. Made by Kijima. I had some "zilla bucks" to burn so I expect them sometime next week.

Are there any instructions with them? I may be able to figure out the seam locking once I have them in my hands.

Dvassino_imp · 01-23-2016, 09:35 AM

The instructions calls for tie wraps on both ends and use glue on seams. The included tie wraps are good, two different sizes for top and bottom. No glue included. I only installed them in November, so it was kind of cool out and the rubber was a little too cold. I may try some silicone in the spring.
Dino

(01-23-2016, 08:18 AM)White Dog_imp Wrote:
(01-23-2016, 05:16 AM)Dvassino_imp Wrote: I purchased a pair of those too. Installed them on my 2014 Standard. They look pretty good but I'm not sure how to keep the seam together. You can't tell they are split from the side view if you twist the seam inward. Let me know what you think. They are very beefy and seem excellent quality.
Dino

(01-23-2016, 03:44 AM)White Dog_imp Wrote: Ordered a pair of the quick mount gaiters from Revzilla this morning. Made by Kijima. I had some "zilla bucks" to burn so I expect them sometime next week.

Are there any instructions with them? I may be able to figure out the seam locking once I have them in my hands.

Are there any instructions with them? I may be able to figure out the seam locking once I have them in my hands.

White Dog_imp · 01-23-2016, 12:52 PM

(01-23-2016, 09:35 AM)Dvassino_imp Wrote: The instructions calls for tie wraps on both ends and use glue on seams. The included tie wraps are good, two different sizes for top and bottom. No glue included. I only installed them in November, so it was kind of cool out and the rubber was a little too cold. I may try some silicone in the spring.
Dino

(01-23-2016, 08:18 AM)White Dog_imp Wrote:
(01-23-2016, 05:16 AM)Dvassino_imp Wrote: I purchased a pair of those too. Installed them on my 2014 Standard. They look pretty good but I'm not sure how to keep the seam together. You can't tell they are split from the side view if you twist the seam inward. Let me know what you think. They are very beefy and seem excellent quality.
Dino

(01-23-2016, 03:44 AM)White Dog_imp Wrote: Ordered a pair of the quick mount gaiters from Revzilla this morning. Made by Kijima. I had some "zilla bucks" to burn so I expect them sometime next week.

Are there any instructions with them? I may be able to figure out the seam locking once I have them in my hands.

Are there any instructions with them? I may be able to figure out the seam locking once I have them in my hands.

Are there any instructions with them? I may be able to figure out the seam locking once I have them in my hands. The verbage from RevZilla says "They're split down the back, and can be slid over your fork tubes, then attached with the interlocking system." I wonder what they mean by interlocking system? No mention of glue being needed. I may have assumed one side would snap into the other. A reviewer on the ad stated they snap together, then use zip ties.

Dvassino_imp · 01-23-2016, 01:53 PM

They don't really snap together. They are mated so that each side of the slit fits together but nothing really holds them in place.
Dino

Lord Popgun · 01-23-2016, 11:17 PM

Well that's disappointing. I was hoping they "snapped" together. So what kind of adhesive do you suppose they need. A contact adhesive, or something like a PVC or rubber cement?

White Dog_imp · 01-24-2016, 01:14 AM

Well, dang! For the money they charge for these things, one would think they would snap together without using glue. Depending on what they are made of will dictate the type glue. If they are real rubber, I think rubber cement would be the glue of choice. If synthetic material, probably a contact adhesive, like maybe Loctite. I'll let you know when my gaiters arrive.

But, maybe the slit does not have to be glued. I may have misinterpreted what the reviewer on the RevZilla ad meant by "snap together".

Lord Popgun · 01-24-2016, 01:26 AM

Please keep us updated. I'm real interested.

White Dog_imp · 01-24-2016, 01:28 AM

According to the ad on evolution cycles, their version includes glue--for a higher price. No big deal--if a glue will work.

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	The GOAT of Short Motorcycle Boots: indie Ridge	rdprdp01	13	1,309	01-08-2025, 08:36 AM Last Post: pdedse
	Boots, Pants, and Airbag Vest	rdprdp01	4	511	11-21-2024, 02:45 PM Last Post: rdprdp01
	sniff my boots	Chuckk_imp	20	957	04-06-2020, 05:39 AM Last Post: IndianRider_imp
	OEM Honda Fork Boots	2017EX_imp	28	1,685	08-03-2019, 03:23 AM Last Post: motoRAT_imp
	Fairing and Fork Boots	garysieben_imp	21	1,567	03-24-2019, 12:49 PM Last Post: peterbaron
	Alternative Fork boots (not the kawa boots)	misterprofessionality	11	1,026	06-01-2018, 05:39 AM Last Post: Rocky_imp
	New Triumph fork boots	Mscb1100_imp	11	806	12-25-2017, 02:21 AM Last Post: the Ferret
	ID these fork boots/ fork gaiters	Riko_imp	9	779	12-18-2017, 09:43 AM Last Post: LongRanger_imp
	Fork Boots (Front Gaiters)	venturer434_imp	16	1,299	11-04-2016, 09:19 PM Last Post: the Ferret
	Fork Boots	trd_wish888_imp	4	301	12-22-2014, 09:52 PM Last Post: Cormanus

Threaded Mode Fork Boots
Author	Message