Login

Randy B · 02-23-2016, 11:22 PM

(02-23-2016, 03:02 PM)Rebel73_imp Wrote: For the guys who have a Road Comet screen, did the inside come unpainted? Mine arrived today with the inside painted the same red as the exterior. I seem to recall a post saying it comes unpainted? [url=http://smg.photobucket.com/user/RobertB755/media/20160223_181523_zps7zsgwika.jpg.html]

(02-23-2016, 10:51 PM)CB4ME_imp Wrote: The red ones come unpainted. The fiberglass itself is red, and the inside is easy to paint. I did mine in silver.

He said his came painted.

Rebel73_imp · 02-24-2016, 01:33 AM

The fiberglass itself is red? Hmm. Well, in any case, I'm leaning towards painting it flat black to give it a more finished look. I do think it looks a bit unfinished as is.

Chapomis_imp · 02-24-2016, 01:45 AM

I was thinking that I would spray mine with plasti dip so it might have a smoother finish

Rebel73_imp · 02-24-2016, 02:11 AM

Yah, Plasti-dip might be a good option. My sister used it on her car's wheels and it looked pretty good.

Ron in MO_imp · 02-24-2016, 11:56 AM

Rob, mine came the same way yours did. I ended up painting the inside with a brush using flat black enamel paint I picked up at Home Depot and it came out great. You don't even have to tape for overspray.

Rebel73_imp · 02-24-2016, 03:36 PM

(02-24-2016, 11:56 AM)Ron in MO_imp Wrote: Rob, mine came the same way yours did. I ended up painting the inside with a brush using flat black enamel paint I picked up at Home Depot and it came out great. You don't even have to tape for overspray.

That's a good idea, Ron. Taping is a PITA!

Papa Weeley_imp · 02-25-2016, 10:02 AM

...to be honest, you can't see a whole lot of the inside when it's mounted, from a seated position.
I never even thought of the inside finish until I read this!

EGAlvarez_imp · 02-26-2016, 01:07 AM

The unfinished, raw looking inside of my RC drove me absolutely crazy and I felt that is was unacceptable on a $500 bikini fairing. Since the inside is a rough fiberglass finish, I used flat black paint with a textured finish. I am very please with the results. Like any painting job, prep is critical. Invest the time to very carefully mask off the red edges with green frog tape.

Here's how mine turned out (The GPS has since been moved a little down and to the left as it was blocking the instruments and taking the key in and out of the ignition was a PITA with the GPS in the way)

Frog Tape:

I used this textured finish paint, but in black:

Good luck!
Eddy

Chapomis_imp · 02-26-2016, 01:11 AM

Looks nice EG. Some rubber caps for the screws would finish it off nice. I wonder if the hardware store sells those ?

Rebel73_imp · 02-26-2016, 02:14 AM

Looks great, EG. Thanks for the tips.

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	power port and Samurider Road Comet Fairing 1	tdbru	9	972	05-04-2025, 07:20 PM Last Post: tdbru
	Road Comet Masqeroad: A Beautiful Pragmatic Response	rdprdp01	7	962	05-04-2025, 11:33 AM Last Post: rdprdp01
	Road Comet: A Beautiful Pragmatic Response	rdprdp01	12	973	10-29-2024, 12:25 AM Last Post: rdprdp01
	Wanted. Chick design comet 2 windshield	Nightryder22_imp	15	1,130	01-22-2023, 03:07 AM Last Post: mvk24_imp
	Road Comet Fairing	Catbird_imp	47	4,127	08-16-2022, 10:33 PM Last Post: Lord Popgun
	Road comet 2 fitment correct??	gretle_2.0	8	798	05-07-2022, 11:08 PM Last Post: Lord Popgun
	Tall Riders and Comet striped shield	Nightryder22_imp	11	1,060	04-08-2022, 09:28 PM Last Post: Cormanus
	Road Comet 2 Impressions	Frulk_imp	12	826	11-14-2021, 07:09 PM Last Post: mrded_imp
	road comet fairing	vfrpaul98_imp	75	4,995	10-21-2021, 02:41 AM Last Post: Lord Popgun
	Saturday morning project - Road Comet 2 Fairing	LuckyNLife_imp	11	893	09-16-2019, 11:36 PM Last Post: Cobalt23_imp

Threaded Mode Road Comet question...
Author	Message