Login

Mscb1100_imp · 09-25-2017, 10:18 AM

I just added some 1 inch risers and it made a great improvement.
Thanks to ca200 for a good deal on pair he didn't need.
The extra inch up and a slight tilt back on the bars takes some weight off my hands and shoulders and makes the ride more pleasant.

the Ferret · 09-25-2017, 12:25 PM

Good deal

Banned_imp · 09-25-2017, 03:06 PM

(09-25-2017, 10:18 AM)Mscb1100_imp Wrote: I just added some 1 inch risers and it made a great improvement.
Thanks to ca200 for a good deal on pair he didn't need.
The extra inch up and a slight tilt back on the bars takes some weight off my hands and shoulders and makes the ride more pleasant.

Did you have to change the stock cables or were they long enough?

Mscb1100_imp · 09-25-2017, 08:10 PM

They had plenty of room
Can easily turn bars full lock side to side

Ban_imp · 10-01-2017, 06:33 PM

Mscb1100: what is your model? I plan to raise my RS handle bar a bit up but wonder if the stock cables are enough.

Mscb1100_imp · 10-10-2017, 02:14 PM

(10-01-2017, 06:33 PM)Ban_imp Wrote: Mscb1100: what is your model? I plan to raise my RS handle bar a bit up but wonder if the stock cables are enough.

Mine is a 2014 standard

Scooter12_imp · 10-10-2017, 11:09 PM

I used these Genmars on my 2014 STD and they worked fine.
http://www.genmarmfg.com/shop/universal-...etail.html
The relieved the pressure on my hands, much more comfortable.

Mscb1100_imp · 10-11-2017, 12:19 AM

(10-10-2017, 11:09 PM)Scooter12_imp Wrote: I used these Genmars on my 2014 STD and they worked fine.
http://www.genmarmfg.com/shop/universal-...etail.html
The relieved the pressure on my hands, much more comfortable.

Scooter, did you have to make any modifications regarding moving brake/clutch or throttle lines.
Do you still have full lock to lock turning with these.
If so I will order a pair today as mine just raised it a inch,
I clicked on the link and they look like they are up and back 1 inch
thnks
David Mscb1100

Scooter12_imp · 10-11-2017, 12:50 AM

No mods for me. The cables and brake/clutch hoses are just long enough. I thought at first that the brake hose was too short, but it's not under any tension, just maximum reach. Any more rise or setback and it would not have worked. They are up 25mm and back 35mm, so 1 inch up and 1 3/8 inch back. Yes, full lock to lock travel, scares me every time the horn button hits my tank bag.

will866_imp · 10-16-2017, 01:29 AM

My 2" Rox risers wourked great without modification to cables. 2014 Deluxe.

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Handlebar riser	Ale72_imp	21	850	12-30-2019, 04:38 AM Last Post: lash_imp
	Options for handle bar riser	itstuantran_imp	1	238	06-21-2019, 03:49 AM Last Post: Bazbro_imp
	Low Bar (CB500) with Riser Flip - Perfect Sport Ergos	Ulvetanna_imp	32	1,539	06-17-2019, 12:19 PM Last Post: Cormanus
	INSTALLED: Rox Pivoting Riser 2" rise x 7/8 stem clamp x 7/8 " handlebar	Mandrau_imp	11	574	10-24-2018, 12:29 AM Last Post: Mandrau_imp
	ROX 5cm bar riser report	Voitus_imp	24	994	01-21-2018, 12:34 PM Last Post: jimgl3_imp
	job completed 17 inch conversion	rmack_imp	15	808	02-24-2017, 02:57 AM Last Post: CB Cycles_imp
	Handlebar Riser Search	Motogeezer1949_imp	5	331	03-18-2015, 03:57 PM Last Post: JustPassinThru_imp
	17 Inch Wheels	jasonlim_imp	14	644	11-23-2013, 02:07 AM Last Post: ingobohn_imp

Threaded Mode I inch riser
Author	Message