Login

PowerDubs_imp · 08-23-2018, 01:36 PM

We will find out when I get out of the er and make it back to my bike.

Sent from my iPhone using Tapatalk

peterbaron · 08-23-2018, 08:25 PM

(08-23-2018, 09:29 AM)Houtman_imp Wrote: I think that guards provide much better protection than sliders.

agree +1

3KBRACING_imp · 08-24-2018, 04:10 AM

(04-30-2018, 04:58 AM)misterprofessionality_imp Wrote: Guards are typically used on cruisers, and sliders are typically used on sport bikes, but the CB is right in between. I see both guards and sliders used on them in pictures, and it seems to be a matter of preference. Does one have a clear advantage over the other in terms of dollars spent vs. protection achieved? are there other advantages of one over the other?

most all threads i found on here were about folks installing guards, so it seems like the forum folks typically prefer guards. on the whole, it seems like guards and sliders are not that far apart in price. What's really going on between these two choices?

A few months ago I tucked the front and the CB went for about a 100 ft. slide on its left side down the asphalt. Replaced the clutch lever, bar end weight, moved the slightly scuffed shock to the other side (so the scratches are on the inside) and replaced the T-REX slider puck (pictured). You'd never know it happened!

Retsel_imp · 08-24-2018, 05:27 AM

(08-23-2018, 01:36 PM)PowerDubs_imp Wrote: We will find out when I get out of the er and make it back to my bike.

Sent from my iPhone using Tapatalk

Ouch! Tough way to find out.

Sent from my SM-T710 using Tapatalk

**Cormanus** · 08-24-2018, 06:08 AM

Welcome 3KBRACING. Good looking bike, although RLETs would augment your handiwork. What’s the front sprocket cover?

Lord Popgun · 08-24-2018, 08:56 AM

Here you go Cormanus: https://www.t-rex-racing.com/Case-Covers...-s/572.htm

**Cormanus** · 08-24-2018, 11:14 AM

Thanks, popgun, but I actually meant the black cover with holes in it above and behind the protector covers and covering the front sprocket.

Lord Popgun · 08-24-2018, 12:09 PM

Ah. Didn’t notice that!

3KBRACING_imp · 08-25-2018, 12:11 AM

(08-24-2018, 06:08 AM)Cormanus_imp Wrote: Welcome 3KBRACING. Good looking bike, although RLETs would augment your handiwork. What’s the front sprocket cover?

Just my own handiwork. Something different. Back in the day we used to drill holes in everything to make it lighter and look cool.

use2b_imp · 08-25-2018, 01:58 AM

sometimes i wonder if having engine guards , crash bars , top of the line helmets and the best of protective gear has anything to do with their frequency of use ?

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Exhaust Sliders for CB1100EX (World Walk)	rdprdp01	2	231	05-13-2026, 05:40 AM Last Post: Cormanus
	Front fork seal Guards, not gators	peterbaron	30	2,151	02-12-2024, 02:06 AM Last Post: Nachodaddy
	axle / frame sliders	dlm1100_imp	9	874	06-02-2023, 10:41 AM Last Post: peterbaron
	R&G front axle sliders	gretle_2.0	11	1,092	06-14-2022, 03:49 AM Last Post: Tev62
	SW Motech engine guards	gretle_2.0	3	433	06-05-2022, 09:54 AM Last Post: gretle_2.0
	R-Gaza engine guards	Nightryder22_imp	9	805	04-15-2022, 12:10 AM Last Post: Nightryder22_imp
	Chain guards	Rexburgtom_imp	26	1,616	01-12-2022, 05:32 AM Last Post: 2017EX_imp
	Frame sliders/engine guards	Cqrlm911_imp	81	4,632	11-10-2021, 06:46 AM Last Post: Houtman_imp
	Yamaha hand guards	jedd_imp	4	829	12-23-2020, 01:29 PM Last Post: GoldOxide_imp
	hand guards and heated grips	misterprofessionality	33	2,270	11-16-2020, 10:06 AM Last Post: mrded_imp

Threaded Mode Sliders or Guards? pros and cons?
Author	Message