Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
solution to poor clock display
Author Message
Chuckk_imp Offline
Been There


Posts: 596
Threads: 19
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Oct 2018
solution to poor clock display
#1



this is my first attempt at solving my problem of not being able to read the time on the CB's display.. it works fairly well, but I want something just a little larger.. the handle bar mounted clocks are so cheap now, I ordered several different ones.. their cost is about $7. to $12. I wanted digital, but must settle for analog.. I had planned on using this stick-on with a handle bar mount, but found it is smaller than the analog ones.. the stick-on is about 1inch in diameter and the analogs are about 1 1/4 inches..
[Image: 7373f4d94894a636f34b02d5003eedb5.jpg]


09-15-2019, 06:01 AM
Find Reply
GoldOxide_imp Offline
Road Warrior


Posts: 12,677
Threads: 77
Likes Received: 3 in 3 posts
Likes Given: 0
Joined: Dec 2014
RE: solution to poor clock display
#2



Creative Chuckk.

Beware: I have used a few of these type of modules and for some reason they eat batteries, at least the ones that provide temperature do. I even had ones that optionally glowed at night - but the batteries did not last long either.

In terms of the metallic analogue handlebar types, they died on me too (just seized up). So I have given up on dash trash from China. For me anyway, they seem to be more hassle than they are worth. Too bad for the landfill.


09-15-2019, 07:46 AM
Find Reply
Chuckk_imp Offline
Been There


Posts: 596
Threads: 19
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Oct 2018
RE: solution to poor clock display
#3



[size=medium[Image: e0a3b0fac5424ba45c914123bd878357.jpg][/size][/font[Image: 25432bc424a3e40ac6de076a173bfe06.jpg][font=Verdana] I would not mind, covering up Honda's clock if I could find one to match my temp display.. because of the extra digit, I would put the clock above the temp.. maybe mount both on a small alum plate then velcro them.. but after a long search for a clock to match, I gave up.. maybe someone out there knows where I could find a clock to match.. let me know ..
my temp gauge does well in normal light.. better than Honda's clock in many instances..
[Image: df73ece7f04d0e96432adf11b92185b7.jpg]


09-15-2019, 09:54 AM
Find Reply
Nortoon_imp Offline
Road Warrior


Posts: 1,121
Threads: 28
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Dec 2014
RE: solution to poor clock display
#4



I wear amber tinted sun glasses when I ride, so I am seldom able to read that tiny dash clock.

I have a folder full of printed maps that have the distance to be travelled and the time required between my food, gas and rest stops. When I decide on my route for the day, I use Excel to plot the distance, time, and gas consumption between stops and print it. If I am delayed for any reason, I use my old flip top cell phone to check the time when I stop.

I did wear my Casio watch one day. Not much more expensive than a stick on clock, and the battery lasts for years. But as I always wear gloves I was never able read it while riding. Which is a good thing because a few seconds with my eyes off the twisty roads I ride could be disastrous.


09-16-2019, 12:23 AM
Find Reply
Chuckk_imp Offline
Been There


Posts: 596
Threads: 19
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Oct 2018
RE: solution to poor clock display
#5



I agree Nortoon..one cannot take their eyes off of the road for more than just a second or so.. with that honda clock, I find myself taking too long, trying to study the display.. it doesn't take much effort to install a cheap self contained clock, so I will be messing around with the three I have on order.. I don't think they will really satisfy me though.. but the ones I don't use, I will give to my friends.. I will confess, yesterday I ordered another one !! .. it is the smallest LED 12v I could find.. I may need to build an enclosure for it.. lots of work, but I like that kind of stuff


09-16-2019, 01:15 AM
Find Reply
Chuckk_imp Offline
Been There


Posts: 596
Threads: 19
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Oct 2018
RE: solution to poor clock display
#6



velcro is my friend.. the led will be powered on with the ignition.. the battery will keep the time.. they say a battery will last for one year .. that's my plan "A" ..


09-16-2019, 03:46 AM
Find Reply
emptysea Offline
Road Warrior

Chicagoland USA
Posts: 5,039
Threads: 137
Likes Received: 167 in 66 posts
Likes Given: 82
Joined: May 2013
RE: solution to poor clock display
#7



Didn't Ole zip-tie a meat thermometer to his bike instead of hooking up an electric one? I'm just thinking that a large-faced, waterproof, analog watch could be strapped/velcroed on to your bars someplace and would be much easier to read on the fly.


09-16-2019, 04:08 AM
Find Reply
Chuckk_imp Offline
Been There


Posts: 596
Threads: 19
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Oct 2018
RE: solution to poor clock display
#8



two of these cheap clocks come with handlebar mounts.. one clock is black, the other silver.. they ran me about $8. ea..
[Image: 89228d2af8eb015494a64a4e7d176a10.jpg]
this is my LED clock I have on order.. it may be a bit of a challenge to use it.. the back is open, so I will have to address that issue.. I might be lucky enough to find a project box to enclose it.. maybe it will just sit on the shelf.. haha ..
[Image: 23ae6a1affaa8ffcfeab702440df6af8.jpg]


09-16-2019, 04:24 AM
Find Reply
Cormanus Offline
Moderator

Queensland, Australia
Posts: 16,282
Threads: 346
Likes Received: 830 in 458 posts
Likes Given: 968
Joined: Apr 2025
RE: solution to poor clock display
#9



(09-16-2019, 04:08 AM)EmptySea_imp Wrote: Didn't Ole zip-tie a meat thermometer to his bike instead of hooking up an electric one? I'm just thinking that a large-faced, waterproof, analog watch could be strapped/velcroed on to your bars someplace and would be much easier to read on the fly.

I did exactly that on another bike once and it worked really well.


09-16-2019, 06:04 AM
Find Reply
GoldOxide_imp Offline
Road Warrior


Posts: 12,677
Threads: 77
Likes Received: 3 in 3 posts
Likes Given: 0
Joined: Dec 2014
RE: solution to poor clock display
#10



(09-16-2019, 06:04 AM)Cormanus_imp Wrote:
(09-16-2019, 04:08 AM)EmptySea_imp Wrote: Didn't Ole zip-tie a meat thermometer to his bike instead of hooking up an electric one? I'm just thinking that a large-faced, waterproof, analog watch could be strapped/velcroed on to your bars someplace and would be much easier to read on the fly.

I did exactly that on another bike once and it worked really well.

I did exactly that on another bike once and it worked really well.
... plus it doubles as a meat thermometer, for those times when the temperature of meat is required ... right there ... handy on the handlebar. Smile


09-16-2019, 11:34 AM
Find Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Designing an Engine Oil Temperature Display Gauge Project 17-CB-002 37 2,211 11-06-2019, 04:10 AM
Last Post: GoldOxide_imp
  a poor man's go-pro Chuckk_imp 3 340 10-15-2019, 07:25 AM
Last Post: Chuckk_imp
  poorly lit display solutions? Chuckk_imp 31 1,789 07-22-2019, 03:17 AM
Last Post: peterbaron
  Bar End Mirrors: My Solution x(why)z_imp 3 394 03-11-2018, 12:41 AM
Last Post: x(why)z_imp

Forum Jump:


Users browsing this thread: 1 Guest(s)