NEW L-KNEE

[Cormanus]

PB, good to hear you’re making progress. Just be wary of some things Houtman says. As the prostate is an internal organ, the said bath might require a sponge being inserted somewhere. I can’t speak for you, but that’s a decidedly unappealing prospect for me.

[peterbaron]

PB, good to hear you’re making progress. Just be wary of some things Houtman says. As the prostate is an internal organ, the said bath might require a sponge being inserted somewhere. I can’t speak for you, but that’s a decidedly unappealing prospect for me.

thanks for your warning...
I think I should apply for a room as popgun suggested in post # 30 = much safer facility

[Randy B]

So glad to hear the surgery went well! Hope to hear the PT pays big dividends.

If I may ask, what was the severe damage due to? Accident or damage suffered over time?

THANK YOU ALL for well wishes and wise PT advise.
Operation went well, but took surgeon an extra hour due to severe damage to my knee.
Hope, he installed all OEM HONDA parts for flawless operation
Spring is the best time for my recovery, so even if I miss 1 month of motorcycling, I will catch up with longer trips later on
Now, as most of you said: keep exercising and bending new knee = totally agree...never mind the f...g pain

Will get back to normal Forum activity soon...and see you on the road again

ALL have happy and safe

Usually that has to do with deterioration of the bone. The doctor has to cut and fit multiple times to try and get to stable bone for the implant to adhere to. Sometimes this can require the company to run over an implant that was not initially sized before the operation to be used.

[GoldOxide_imp]

So glad to hear the surgery went well! Hope to hear the PT pays big dividends.

If I may ask, what was the severe damage due to? Accident or damage suffered over time?

THANK YOU ALL for well wishes and wise PT advise.
Operation went well, but took surgeon an extra hour due to severe damage to my knee.
Hope, he installed all OEM HONDA parts for flawless operation
Spring is the best time for my recovery, so even if I miss 1 month of motorcycling, I will catch up with longer trips later on
Now, as most of you said: keep exercising and bending new knee = totally agree...never mind the f...g pain

Will get back to normal Forum activity soon...and see you on the road again

ALL have happy and safe

Usually that has to do with deterioration of the bone. The doctor has to cut and fit multiple times to try and get to stable bone for the implant to adhere to. Sometimes this can require the company to run over an implant that was not initially sized before the operation to be used.

Usually that has to do with deterioration of the bone. The doctor has to cut and fit multiple times to try and get to stable bone for the implant to adhere to. Sometimes this can require the company to run over an implant that was not initially sized before the operation to be used.
Hey Randy: Can you please clarify "run over an implant"?

[peterbaron]

So glad to hear the surgery went well! Hope to hear the PT pays big dividends.

If I may ask, what was the severe damage due to? Accident or damage suffered over time?

THANK YOU ALL for well wishes and wise PT advise.
Operation went well, but took surgeon an extra hour due to severe damage to my knee.
Hope, he installed all OEM HONDA parts for flawless operation
Spring is the best time for my recovery, so even if I miss 1 month of motorcycling, I will catch up with longer trips later on
Now, as most of you said: keep exercising and bending new knee = totally agree...never mind the f...g pain

Will get back to normal Forum activity soon...and see you on the road again

ALL have happy and safe

Usually that has to do with deterioration of the bone. The doctor has to cut and fit multiple times to try and get to stable bone for the implant to adhere to. Sometimes this can require the company to run over an implant that was not initially sized before the operation to be used.

Usually that has to do with deterioration of the bone. The doctor has to cut and fit multiple times to try and get to stable bone for the implant to adhere to. Sometimes this can require the company to run over an implant that was not initially sized before the operation to be used.
Hey Randy: Can you please clarify "run over an implant"?

Usually that has to do with deterioration of the bone. The doctor has to cut and fit multiple times to try and get to stable bone for the implant to adhere to. Sometimes this can require the company to run over an implant that was not initially sized before the operation to be used. Hey Randy: Can you please clarify "run over an implant"?
Yes, agree with GO request for explanation...

Geee... I have some feelings as if my knee was being peeled off again...

I have to admit, I like your new "Black Hole" avatar, well done GO =

[GoldOxide_imp]

So glad to hear the surgery went well! Hope to hear the PT pays big dividends.

If I may ask, what was the severe damage due to? Accident or damage suffered over time?

THANK YOU ALL for well wishes and wise PT advise.
Operation went well, but took surgeon an extra hour due to severe damage to my knee.
Hope, he installed all OEM HONDA parts for flawless operation
Spring is the best time for my recovery, so even if I miss 1 month of motorcycling, I will catch up with longer trips later on
Now, as most of you said: keep exercising and bending new knee = totally agree...never mind the f...g pain

Will get back to normal Forum activity soon...and see you on the road again

ALL have happy and safe

Usually that has to do with deterioration of the bone. The doctor has to cut and fit multiple times to try and get to stable bone for the implant to adhere to. Sometimes this can require the company to run over an implant that was not initially sized before the operation to be used.

Usually that has to do with deterioration of the bone. The doctor has to cut and fit multiple times to try and get to stable bone for the implant to adhere to. Sometimes this can require the company to run over an implant that was not initially sized before the operation to be used.
Hey Randy: Can you please clarify "run over an implant"?

Usually that has to do with deterioration of the bone. The doctor has to cut and fit multiple times to try and get to stable bone for the implant to adhere to. Sometimes this can require the company to run over an implant that was not initially sized before the operation to be used. Hey Randy: Can you please clarify "run over an implant"?
Yes, agree with GO request for explanation...

Geee... I have some feelings as if my knee was being peeled off again...

I have to admit, I like your new "Black Hole" avatar, well done GO =

Ouch!!

That sounds kinda gross there PB.

Anyway, definitely feel for ya.

So glad to hear the surgery went well! Hope to hear the PT pays big dividends.

If I may ask, what was the severe damage due to? Accident or damage suffered over time?

THANK YOU ALL for well wishes and wise PT advise.
Operation went well, but took surgeon an extra hour due to severe damage to my knee.
Hope, he installed all OEM HONDA parts for flawless operation
Spring is the best time for my recovery, so even if I miss 1 month of motorcycling, I will catch up with longer trips later on
Now, as most of you said: keep exercising and bending new knee = totally agree...never mind the f...g pain

Will get back to normal Forum activity soon...and see you on the road again

ALL have happy and safe

Usually that has to do with deterioration of the bone. The doctor has to cut and fit multiple times to try and get to stable bone for the implant to adhere to. Sometimes this can require the company to run over an implant that was not initially sized before the operation to be used.

Usually that has to do with deterioration of the bone. The doctor has to cut and fit multiple times to try and get to stable bone for the implant to adhere to. Sometimes this can require the company to run over an implant that was not initially sized before the operation to be used.
Hey Randy: Can you please clarify "run over an implant"?

Usually that has to do with deterioration of the bone. The doctor has to cut and fit multiple times to try and get to stable bone for the implant to adhere to. Sometimes this can require the company to run over an implant that was not initially sized before the operation to be used. Hey Randy: Can you please clarify "run over an implant"?
Yes, agree with GO request for explanation...

Geee... I have some feelings as if my knee was being peeled off again...

I have to admit, I like your new "Black Hole" avatar, well done GO =

Thanks PB. A modern day event [horizon] avatar refresh.

Sometimes when I squint at it, it looks like looking down a tailpipe that is about to backfire.

[Csory_imp]

So glad to hear the surgery went well! Hope to hear the PT pays big dividends.

If I may ask, what was the severe damage due to? Accident or damage suffered over time?

THANK YOU ALL for well wishes and wise PT advise.
Operation went well, but took surgeon an extra hour due to severe damage to my knee.
Hope, he installed all OEM HONDA parts for flawless operation
Spring is the best time for my recovery, so even if I miss 1 month of motorcycling, I will catch up with longer trips later on
Now, as most of you said: keep exercising and bending new knee = totally agree...never mind the f...g pain

Will get back to normal Forum activity soon...and see you on the road again

ALL have happy and safe

Usually that has to do with deterioration of the bone. The doctor has to cut and fit multiple times to try and get to stable bone for the implant to adhere to. Sometimes this can require the company to run over an implant that was not initially sized before the operation to be used.

Usually that has to do with deterioration of the bone. The doctor has to cut and fit multiple times to try and get to stable bone for the implant to adhere to. Sometimes this can require the company to run over an implant that was not initially sized before the operation to be used.
Hey Randy: Can you please clarify "run over an implant"?

Usually that has to do with deterioration of the bone. The doctor has to cut and fit multiple times to try and get to stable bone for the implant to adhere to. Sometimes this can require the company to run over an implant that was not initially sized before the operation to be used. Hey Randy: Can you please clarify "run over an implant"?
Yes, agree with GO request for explanation...

Geee... I have some feelings as if my knee was being peeled off again...

I have to admit, I like your new "Black Hole" avatar, well done GO =

Usually that has to do with deterioration of the bone. The doctor has to cut and fit multiple times to try and get to stable bone for the implant to adhere to. Sometimes this can require the company to run over an implant that was not initially sized before the operation to be used. Hey Randy: Can you please clarify "run over an implant"?
Yes, agree with GO request for explanation...

Geee... I have some feelings as if my knee was being peeled off again...

I have to admit, I like your new "Black Hole" avatar, well done GO =
Could that be something like "Have someone to run and grab another implant in a hurry, because the one they prepared did not fit (due to bone deterioration)"?

[the Ferret]

That's how I take it Csory.

[Randy B]

So glad to hear the surgery went well! Hope to hear the PT pays big dividends.

If I may ask, what was the severe damage due to? Accident or damage suffered over time?

THANK YOU ALL for well wishes and wise PT advise.
Operation went well, but took surgeon an extra hour due to severe damage to my knee.
Hope, he installed all OEM HONDA parts for flawless operation
Spring is the best time for my recovery, so even if I miss 1 month of motorcycling, I will catch up with longer trips later on
Now, as most of you said: keep exercising and bending new knee = totally agree...never mind the f...g pain

Will get back to normal Forum activity soon...and see you on the road again

ALL have happy and safe

Usually that has to do with deterioration of the bone. The doctor has to cut and fit multiple times to try and get to stable bone for the implant to adhere to. Sometimes this can require the company to run over an implant that was not initially sized before the operation to be used.

Usually that has to do with deterioration of the bone. The doctor has to cut and fit multiple times to try and get to stable bone for the implant to adhere to. Sometimes this can require the company to run over an implant that was not initially sized before the operation to be used.
Hey Randy: Can you please clarify "run over an implant"?

Usually that has to do with deterioration of the bone. The doctor has to cut and fit multiple times to try and get to stable bone for the implant to adhere to. Sometimes this can require the company to run over an implant that was not initially sized before the operation to be used.
Hey Randy: Can you please clarify "run over an implant"?

So glad to hear the surgery went well! Hope to hear the PT pays big dividends.

If I may ask, what was the severe damage due to? Accident or damage suffered over time?

THANK YOU ALL for well wishes and wise PT advise.
Operation went well, but took surgeon an extra hour due to severe damage to my knee.
Hope, he installed all OEM HONDA parts for flawless operation
Spring is the best time for my recovery, so even if I miss 1 month of motorcycling, I will catch up with longer trips later on
Now, as most of you said: keep exercising and bending new knee = totally agree...never mind the f...g pain

Will get back to normal Forum activity soon...and see you on the road again

ALL have happy and safe

Usually that has to do with deterioration of the bone. The doctor has to cut and fit multiple times to try and get to stable bone for the implant to adhere to. Sometimes this can require the company to run over an implant that was not initially sized before the operation to be used.

Usually that has to do with deterioration of the bone. The doctor has to cut and fit multiple times to try and get to stable bone for the implant to adhere to. Sometimes this can require the company to run over an implant that was not initially sized before the operation to be used.
Hey Randy: Can you please clarify "run over an implant"?

Usually that has to do with deterioration of the bone. The doctor has to cut and fit multiple times to try and get to stable bone for the implant to adhere to. Sometimes this can require the company to run over an implant that was not initially sized before the operation to be used. Hey Randy: Can you please clarify "run over an implant"?
Yes, agree with GO request for explanation...

Geee... I have some feelings as if my knee was being peeled off again...

I have to admit, I like your new "Black Hole" avatar, well done GO =

Usually that has to do with deterioration of the bone. The doctor has to cut and fit multiple times to try and get to stable bone for the implant to adhere to. Sometimes this can require the company to run over an implant that was not initially sized before the operation to be used. Hey Randy: Can you please clarify "run over an implant"?
Yes, agree with GO request for explanation...

Geee... I have some feelings as if my knee was being peeled off again...

I have to admit, I like your new "Black Hole" avatar, well done GO =
Could that be something like "Have someone to run and grab another implant in a hurry, because the one they prepared did not fit (due to bone deterioration)"?

Usually that has to do with deterioration of the bone. The doctor has to cut and fit multiple times to try and get to stable bone for the implant to adhere to. Sometimes this can require the company to run over an implant that was not initially sized before the operation to be used. Hey Randy: Can you please clarify "run over an implant"?
Yes, agree with GO request for explanation...

Geee... I have some feelings as if my knee was being peeled off again...

I have to admit, I like your new "Black Hole" avatar, well done GO =
Could that be something like "Have someone to run and grab another implant in a hurry, because the one they prepared did not fit (due to bone deterioration)"?
That would be the correct interpretation of my response.

[Blockhead_imp]

https://www.patients.stryker.com/knee-re...total-knee

Click on this link, this is the type of surgery I had done a year ago in January. It’s amazing what they can do these days.

As others have said, proper PT is vital to recovery.