Login

Tev62 · 03-19-2021, 06:18 PM

(03-19-2021, 08:42 AM)Lord Popgun_imp Wrote: They do look Great!!

However comma ( ) They need to change the decal. That .it site does not work. For those interested, the site is https://www.bartfactory.com

Yes, I guess they made their mold for the rubber before switching over to .com. In fairness to them it does redirect and once my tyre is on you can't see it Smile

They've just got to work on that label now! Well spotted, I never picked up on that. My guess
is they changed it when it looks like they were purchased by the RK Group in 2019. They have been around since 2006 but I had never heard of them until I joined this forum.

Tev62 · 03-20-2021, 10:49 AM

Well I got these fitted today and managed a short 20 mile round trip. I can't tell the difference between tubed or tubeless wheels of course but it is nice to know I can plug a puncture by the roadside should I need to now.

As for the T31 tyres - all I can say is WOW! I had the bike handling superbly on the OEM Dunlops but the Bridgestone T31's were in a different league. I know new tyres always feel better but these really changed how the bike handled, I was genuinely surprised, grinning ear to ear and really enjoying the ride. 10 out of 10 for T31's from me.

Just in case you think I am getting over excited about new tyres I put new tyres on my Daytona and Tiger recently too and they were nice to have but I didn't get a transformative ride with those as I did with this change on the CB.

GoldOxide_imp · 03-20-2021, 12:30 PM

That's awesome Tev. New rubber, especially rubber that performs above expectations is pure joy.

Tubeless rims - pretty well Bob's yer uncle now. I wonder if extra joy can be harvested if you jab a puncture in a T31 and then plug it. That would cover everything, might even justify a[nother] pint.

Tev62 · 03-20-2021, 07:04 PM

(03-20-2021, 12:30 PM)GoldOxide_imp Wrote: That's awesome Tev. New rubber, especially rubber that performs above expectations is pure joy.

Tubeless rims - pretty well Bob's yer uncle now. I wonder if extra joy can be harvested if you jab a puncture in a T31 and then plug it. That would cover everything, might even justify a[nother] pint.

Hmm, no, that won't be happening! But another pint, yes, no justification required. Big Grin

Enzofour_imp · 03-20-2021, 09:41 PM

I have been using Bartubeless for over a month and have always checked my pressure, never needed to restore.

Houtman_imp · 03-20-2021, 09:51 PM

I would love to have the Bart tubeless conversion as it looks very professional but the shipping cost AND shipping time from the USA to Italy and back could be a long time , especially during the covid restrictions .

Tev62 · 03-21-2021, 12:03 AM

(03-20-2021, 09:41 PM)Enzofour_imp Wrote: I have been using Bartubeless for over a month and have always checked my pressure, never needed to restore.

Great to hear Enzofour Thumbs Up

Tev62 · 04-27-2021, 06:35 PM

I have topped up my front and rear by a couple of PSI since going with BartFactory but no more than my regular tubeless bikes so they are working well for me. I found myself down a heavily rutted and potholed track the other day and the tyres (and suspension) got a good kicking, no problems at all. Very happy with the conversion.

Due to the new tyre tread depth between front and rear and/or tyre profile of the Bridgestone T31's I have been able to re-add some of my front preload giving me a little extra compression suspension travel on the forks. The bike was handling pin sharp as the bike must of regained a forward lean shortening the trail somewhat with the new tyres. I was able to take the front preload back in two rings and maintain great handling. Does anyone know the spring rate Honda use in the 2017MY EX forks out of interest?

17-CB-002 · 04-28-2021, 01:23 PM

(03-20-2021, 10:49 AM)Tev62_imp Wrote: Well I got these fitted today and managed a short 20 mile round trip. I can't tell the difference between tubed or tubeless wheels of course but it is nice to know I can plug a puncture by the roadside should I need to now.

As for the T31 tyres - all I can say is WOW! I had the bike handling superbly on the OEM Dunlops but the Bridgestone T31's were in a different league. I know new tyres always feel better but these really changed how the bike handled, I was genuinely surprised, grinning ear to ear and really enjoying the ride. 10 out of 10 for T31's from me.

Just in case you think I am getting over excited about new tyres I put new tyres on my Daytona and Tiger recently too and they were nice to have but I didn't get a transformative ride with those as I did with this change on the CB.

Which T31 tire sizes did you get for both front & rear?
Thanks

Tev62 · 04-28-2021, 09:23 PM

Completely Stock sizes Alain. Front 110/80R18M/C 58V Rear 140/70R18M/C 67V

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Factory low seat?	PowerDubs_imp	5	383	04-11-2023, 08:13 AM Last Post: curated_imp
	Cool factory 2 tone seat. Where is the guy that has the special edition black / grey	PowerDubs_imp	3	372	03-14-2023, 03:17 AM Last Post: 12milesout
	K FACTORY CSR Exhaust	silascopathic_imp	67	2,904	12-01-2018, 04:45 PM Last Post: Cormanus
	Anyone know of a source for the factory grips?	chync_imp	2	260	04-01-2018, 06:38 PM Last Post: chync_imp
	My DLX factory pipes are too dang quiet!	Rebel73_imp	29	1,402	08-06-2017, 07:39 AM Last Post: rustyski_imp
	Factory Black Mirrors?	Macduff_imp	6	471	07-05-2017, 08:14 AM Last Post: Cormanus
	Tallest Factory Seat ?	Macduff_imp	4	308	07-01-2017, 08:55 PM Last Post: the Ferret
	Factory accessories (2017)	spacetiger_imp	2	285	03-20-2017, 02:01 AM Last Post: mrbi0_imp
	Gut Factory Muffler	offroadfx4_imp	94	3,716	07-28-2016, 11:53 PM Last Post: kennyw
	Factory muffler with a baffle cut out	WayFast86_imp	1	157	04-11-2016, 05:45 AM Last Post: Lord Popgun

Threaded Mode Bart Factory
Author	Message