Login

Tev62 · 03-19-2021, 06:09 AM

Well I got my Bart Factory tubeless wheel conversions back yesterday so I thought I would share a few pictures. The turnaround time was quite long but I was pleased with the end result.

The job is very nice and they offer a four year warranty on the work which I hope is a testament to the quality of the process. Yes, a little pricey compared to alternative self solutions, e.g. Outex or 3M tape solutions but I was willing to pay.

This morning I managed to nip out of work and get a couple of Bridgestone T31's fitted which were good value. I just need to get the wheels back on the bike now and use it for a commute to/from work to check them out.

the Ferret · 03-19-2021, 06:15 AM

Very nice wheels

Houtman_imp · 03-19-2021, 06:24 AM

That looks like a perfect job ! How much did this cost you ( without shipping ) ?

**pdedse** · 03-19-2021, 06:24 AM

Very interesting. Thanks for the photos...the job they did looks high quality. I wonder if they test them out by putting on tires to check for pressure loss before calling them done.

peterbaron · 03-19-2021, 06:30 AM

Looks professional and quality job, Tev.

Tev62 · 03-19-2021, 06:31 AM

(03-19-2021, 06:24 AM)Houtman_imp Wrote: That looks like a perfect job ! How much did this cost you ( without shipping ) ?

It was €110 (~ $130 USD) per wheel which includes a 21% sales tax (VAT). They fit a new valve too of course which is a metal stem.

(03-19-2021, 06:24 AM)pdedse_imp Wrote: Very interesting. Thanks for the photos...the job they did looks high quality. I wonder if they test them out by putting on tires to check for pressure loss before calling them done.

I would say they must test it somehow as the cost of reshipping and the times involved would make for a negative customer service experience.

I nearly went for new spokes too but decided that was a little too extravagant.

(03-19-2021, 06:30 AM)peterbaron_imp Wrote: Looks professional and quality job, Tev.

Yes, very pleased with them. Great to know I can plug a puncture on the side of the road if needed now.

**Cormanus** · 03-19-2021, 07:48 AM

They look great.

Lord Popgun · 03-19-2021, 08:42 AM

They do look Great!!

However comma ( Smile

) They need to change the decal. That .it site does not work. For those interested, the site is https://www.bartfactory.com

peterbaron · 03-19-2021, 09:54 AM

https://www.bartfactory.com/?lang=en

GoldOxide_imp · 03-19-2021, 11:44 AM

Very, very nice Tev. Thanks for that share.

North America needs a licensed outlet here.

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Factory low seat?	PowerDubs_imp	5	511	04-11-2023, 08:13 AM Last Post: curated_imp
	Cool factory 2 tone seat. Where is the guy that has the special edition black / grey	PowerDubs_imp	3	477	03-14-2023, 03:17 AM Last Post: 12milesout
	K FACTORY CSR Exhaust	silascopathic_imp	67	4,290	12-01-2018, 04:45 PM Last Post: Cormanus
	Anyone know of a source for the factory grips?	chync_imp	2	320	04-01-2018, 06:38 PM Last Post: chync_imp
	My DLX factory pipes are too dang quiet!	Rebel73_imp	29	1,950	08-06-2017, 07:39 AM Last Post: rustyski_imp
	Factory Black Mirrors?	Macduff_imp	6	621	07-05-2017, 08:14 AM Last Post: Cormanus
	Tallest Factory Seat ?	Macduff_imp	4	412	07-01-2017, 08:55 PM Last Post: the Ferret
	Factory accessories (2017)	spacetiger_imp	2	357	03-20-2017, 02:01 AM Last Post: mrbi0_imp
	Gut Factory Muffler	Offroad	94	5,462	07-28-2016, 11:53 PM Last Post: kennyw
	Factory muffler with a baffle cut out	WayFast86_imp	1	212	04-11-2016, 05:45 AM Last Post: Lord Popgun

Threaded Mode Bart Factory
Author	Message