Negotiator-S Speed Pulse Modulator?

[PowerDubs_imp]

Out of curiosity, under what circumstances are you guys running a CB1100 over 112mph? Not judging, just curious...

i want to do a standing mile event with mine but thatl never happen with the limiter

i want to do a standing mile event with mine but thatl never happen with the limiter

Nice. I’ve been to a few airport runway speed events - but never on a bike, just in my cars.


Sent from my iPhone using Tapatalk

Out of curiosity, under what circumstances are you guys running a CB1100 over 112mph? Not judging, just curious...

top of 3rd gear, going into 4th.. is usually the situation for me, running with my buddy on his z900. he likes to just go to 115, hold it there and do the slow walk away. lol.

top of 3rd gear, going into 4th.. is usually the situation for me, running with my buddy on his z900. he likes to just go to 115, hold it there and do the slow walk away. lol.


Made me laugh.


Sent from my iPhone using Tapatalk

[TonyJames_imp]

I've been researching how to take my speed limiter off on my 2013 cb1100 and since guhls motors no longer does that i was wondering if anyone has used the special agent Negotiator-S Speed Pulse Modulator and if it works well and easy to install?

https://japan.webike.net/products/20034107.html

UPDATE: I pulled the trigger on it and after a little bit of translating and double checking the wiring diagram of the bike I was able to get it all wired up and it works great no issues and no more speed limiter

[rich_imp]

could we just fill in every other slot in the trigger wheel
ECU may think we are going half fast

[GoldOxide_imp]

I've been researching how to take my speed limiter off on my 2013 cb1100 and since guhls motors no longer does that i was wondering if anyone has used the special agent Negotiator-S Speed Pulse Modulator and if it works well and easy to install?

https://japan.webike.net/products/20034107.html

UPDATE: I pulled the trigger on it and after a little bit of translating and double checking the wiring diagram of the bike I was able to get it all wired up and it works great no issues and no more speed limiter

UPDATE: I pulled the trigger on it and after a little bit of translating and double checking the wiring diagram of the bike I was able to get it all wired up and it works great no issues and no more speed limiter
Interesting. What might a ground velocity of 180 km/h (112 mph) look like on the speed dial?

[Nachodaddy]

could we just fill in every other slot in the trigger wheel
ECU may think we are going half fast

I've done a few half-fast things in my life, but this is so crazy, it might just work.
In a half-fast way. . .

[TonyJames_imp]

this is good to know. I was eyeballing that all year. glad it actually works. any insight as to things to watch out for on install?

There where a few things that made it confusing but you can just translate the install guide from Japanese to what ever you can read, then the other obstacle was that in japan they seem to have a slightly different wiring harness and ecu so you will need the wiring diagram to figure out which wire you need to cut and connect to the module. other than that just need to make sure you do a good job on soldering the connections.

I've been researching how to take my speed limiter off on my 2013 cb1100 and since guhls motors no longer does that i was wondering if anyone has used the special agent Negotiator-S Speed Pulse Modulator and if it works well and easy to install?

https://japan.webike.net/products/20034107.html

UPDATE: I pulled the trigger on it and after a little bit of translating and double checking the wiring diagram of the bike I was able to get it all wired up and it works great no issues and no more speed limiter

UPDATE: I pulled the trigger on it and after a little bit of translating and double checking the wiring diagram of the bike I was able to get it all wired up and it works great no issues and no more speed limiter
Interesting. What might a ground velocity of 180 km/h (112 mph) look like on the speed dial?

UPDATE: I pulled the trigger on it and after a little bit of translating and double checking the wiring diagram of the bike I was able to get it all wired up and it works great no issues and no more speed limiter
Interesting. What might a ground velocity of 180 km/h (112 mph) look like on the speed dial?
so with no speed limiter my stock bike will now go 140mph on the top of 4th but that's where the speedometer stops and it seems to slow down to 135 in 5th so there is some tuning that needs to be done to go any faster.

[Randy B]

this is good to know. I was eyeballing that all year. glad it actually works. any insight as to things to watch out for on install?

There where a few things that made it confusing but you can just translate the install guide from Japanese to what ever you can read, then the other obstacle was that in japan they seem to have a slightly different wiring harness and ecu so you will need the wiring diagram to figure out which wire you need to cut and connect to the module. other than that just need to make sure you do a good job on soldering the connections.

I've been researching how to take my speed limiter off on my 2013 cb1100 and since guhls motors no longer does that i was wondering if anyone has used the special agent Negotiator-S Speed Pulse Modulator and if it works well and easy to install?

https://japan.webike.net/products/20034107.html

UPDATE: I pulled the trigger on it and after a little bit of translating and double checking the wiring diagram of the bike I was able to get it all wired up and it works great no issues and no more speed limiter

UPDATE: I pulled the trigger on it and after a little bit of translating and double checking the wiring diagram of the bike I was able to get it all wired up and it works great no issues and no more speed limiter
Interesting. What might a ground velocity of 180 km/h (112 mph) look like on the speed dial?

UPDATE: I pulled the trigger on it and after a little bit of translating and double checking the wiring diagram of the bike I was able to get it all wired up and it works great no issues and no more speed limiter
Interesting. What might a ground velocity of 180 km/h (112 mph) look like on the speed dial?
so with no speed limiter my stock bike will now go 140mph on the top of 4th but that's where the speedometer stops and it seems to slow down to 135 in 5th so there is some tuning that needs to be done to go any faster.

There where a few things that made it confusing but you can just translate the install guide from Japanese to what ever you can read, then the other obstacle was that in japan they seem to have a slightly different wiring harness and ecu so you will need the wiring diagram to figure out which wire you need to cut and connect to the module. other than that just need to make sure you do a good job on soldering the connections.

I've been researching how to take my speed limiter off on my 2013 cb1100 and since guhls motors no longer does that i was wondering if anyone has used the special agent Negotiator-S Speed Pulse Modulator and if it works well and easy to install?

https://japan.webike.net/products/20034107.html

UPDATE: I pulled the trigger on it and after a little bit of translating and double checking the wiring diagram of the bike I was able to get it all wired up and it works great no issues and no more speed limiter

UPDATE: I pulled the trigger on it and after a little bit of translating and double checking the wiring diagram of the bike I was able to get it all wired up and it works great no issues and no more speed limiter
Interesting. What might a ground velocity of 180 km/h (112 mph) look like on the speed dial?

UPDATE: I pulled the trigger on it and after a little bit of translating and double checking the wiring diagram of the bike I was able to get it all wired up and it works great no issues and no more speed limiter
Interesting. What might a ground velocity of 180 km/h (112 mph) look like on the speed dial?
so with no speed limiter my stock bike will now go 140mph on the top of 4th but that's where the speedometer stops and it seems to slow down to 135 in 5th so there is some tuning that needs to be done to go any faster. That was my question....if the speedometer stays accurate. Good deal.

[GoldOxide_imp]

this is good to know. I was eyeballing that all year. glad it actually works. any insight as to things to watch out for on install?

There where a few things that made it confusing but you can just translate the install guide from Japanese to what ever you can read, then the other obstacle was that in japan they seem to have a slightly different wiring harness and ecu so you will need the wiring diagram to figure out which wire you need to cut and connect to the module. other than that just need to make sure you do a good job on soldering the connections.

I've been researching how to take my speed limiter off on my 2013 cb1100 and since guhls motors no longer does that i was wondering if anyone has used the special agent Negotiator-S Speed Pulse Modulator and if it works well and easy to install?

https://japan.webike.net/products/20034107.html

UPDATE: I pulled the trigger on it and after a little bit of translating and double checking the wiring diagram of the bike I was able to get it all wired up and it works great no issues and no more speed limiter

UPDATE: I pulled the trigger on it and after a little bit of translating and double checking the wiring diagram of the bike I was able to get it all wired up and it works great no issues and no more speed limiter
Interesting. What might a ground velocity of 180 km/h (112 mph) look like on the speed dial?

UPDATE: I pulled the trigger on it and after a little bit of translating and double checking the wiring diagram of the bike I was able to get it all wired up and it works great no issues and no more speed limiter
Interesting. What might a ground velocity of 180 km/h (112 mph) look like on the speed dial?
so with no speed limiter my stock bike will now go 140mph on the top of 4th but that's where the speedometer stops and it seems to slow down to 135 in 5th so there is some tuning that needs to be done to go any faster.

There where a few things that made it confusing but you can just translate the install guide from Japanese to what ever you can read, then the other obstacle was that in japan they seem to have a slightly different wiring harness and ecu so you will need the wiring diagram to figure out which wire you need to cut and connect to the module. other than that just need to make sure you do a good job on soldering the connections.

I've been researching how to take my speed limiter off on my 2013 cb1100 and since guhls motors no longer does that i was wondering if anyone has used the special agent Negotiator-S Speed Pulse Modulator and if it works well and easy to install?

https://japan.webike.net/products/20034107.html

UPDATE: I pulled the trigger on it and after a little bit of translating and double checking the wiring diagram of the bike I was able to get it all wired up and it works great no issues and no more speed limiter

UPDATE: I pulled the trigger on it and after a little bit of translating and double checking the wiring diagram of the bike I was able to get it all wired up and it works great no issues and no more speed limiter
Interesting. What might a ground velocity of 180 km/h (112 mph) look like on the speed dial?

UPDATE: I pulled the trigger on it and after a little bit of translating and double checking the wiring diagram of the bike I was able to get it all wired up and it works great no issues and no more speed limiter
Interesting. What might a ground velocity of 180 km/h (112 mph) look like on the speed dial?
so with no speed limiter my stock bike will now go 140mph on the top of 4th but that's where the speedometer stops and it seems to slow down to 135 in 5th so there is some tuning that needs to be done to go any faster. That was my question....if the speedometer stays accurate. Good deal.

I reckon with some spare time, one could take a Raspberry Pi Zero and a wee bit of interfacing hardware and leverage the Honda sensors and design up a reliable and accurate (and re-configurable) speedo computer. Can probably do it with a much less embedded system. The Zero W already comes with WiFi built-in, which is useful.

[rich_imp]

let us know what you do in the 1/4