Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Motus
#21
(07-06-2018, 06:41 AM)silverbub_imp Wrote: 3/4 quart of oil consumed in ~3K miles after 600 mi break-in service...did the MST finally get rings sealed???...I like Honda(or any bike) to not consume oil after break-in...I like seeing oil at FULL line on sightglass...& checking sightglass mostly out of habit & not of necessity...BUT...if I found a spare 32K $ in a shoebox in closet...

Riding the slab, I suspect that the rings did not get seated properly.
Reply
#22
(07-06-2018, 07:01 AM)The ferret_imp Wrote: Yea, that's a lot of oil consumption. My ST only used a couple ounces of oil in 4,000 miles when it had 100,000 miles on it.
My 2005 ST 1300 used nearly a quart of oil during break in but afterwards used little if any.
Reply
#23
I test rode one last year when the test ride fleet came to a local dealer which just picked them up. It was a pretty long test ride. I was unimpressed. It felt like a kit bike. A collection of top shelf parts bolted together around a loud, hot, unrefined motor with automotive peripherals. The lack of resources to manufacture their own fully-integrated components and to refine and integrate them is very evident. It is hard for me to believe that a Motus could ever put down the type of power that a modern liquid cooled high tech motorcycle engine can make.
Reply
#24
thanks for the review Apex i always hungered for that bike but now know i would have been disappointed.
She was pure like snowflakes No one could ever stain The memory of my angel Could never cause me pain , Years go by .......
Reply
#25
My blood runs cold. My memory has just been sold.
Reply
#26
(07-06-2018, 10:23 AM)apex1_imp Wrote: I test rode one last year when the test ride fleet came to a local dealer which just picked them up. It was a pretty long test ride. I was unimpressed. It felt like a kit bike. A collection of top shelf parts bolted together around a loud, hot, unrefined motor with automotive peripherals. The lack of resources to manufacture their own fully-integrated components and to refine and integrate them is very evident. It is hard for me to believe that a Motus could ever put down the type of power that a modern liquid cooled high tech motorcycle engine can make.
The top shelf parts are the ones many cyclists use to replace the OEM stuff on their bikes, anyway--Ohlins suspension, Brembo brakes, braided lines, OZ wheels, Akrapovic exhaust. And their loud, hot, unrefined motor: 165 hp and 135 ft lb torque from a 2-valve-per-cylinder pushrod motor. And all of that on their base model. You say unrefined. I say bravo.

Yes, Motus can't compete with global corporations who have been making motorcycles for over 50 years. But you cannot deny they have produced pretty spectacular results for a first effort. I get that not everyone is going to be impressed. I think that's a result of personal preference, not a result of Motus' design. Some people would rather drive a Z-car. Some people would rather drive a Camaro.
Reply
#27
(07-07-2018, 01:24 AM)Roper_imp Wrote:
(07-06-2018, 10:23 AM)apex1_imp Wrote: I test rode one last year when the test ride fleet came to a local dealer which just picked them up. It was a pretty long test ride. I was unimpressed. It felt like a kit bike. A collection of top shelf parts bolted together around a loud, hot, unrefined motor with automotive peripherals. The lack of resources to manufacture their own fully-integrated components and to refine and integrate them is very evident. It is hard for me to believe that a Motus could ever put down the type of power that a modern liquid cooled high tech motorcycle engine can make.
The top shelf parts are the ones many cyclists use to replace the OEM stuff on their bikes, anyway--Ohlins suspension, Brembo brakes, braided lines, OZ wheels, Akrapovic exhaust. And their loud, hot, unrefined motor: 165 hp and 135 ft lb torque from a 2-valve-per-cylinder pushrod motor. And all of that on their base model. You say unrefined. I say bravo.

Yes, Motus can't compete with global corporations who have been making motorcycles for over 50 years. But you cannot deny they have produced pretty spectacular results for a first effort. I get that not everyone is going to be impressed. I think that's a result of personal preference, not a result of Motus' design. Some people would rather drive a Z-car. Some people would rather drive a Camaro.
The top shelf parts are the ones many cyclists use to replace the OEM stuff on their bikes, anyway--Ohlins suspension, Brembo brakes, braided lines, OZ wheels, Akrapovic exhaust. And their loud, hot, unrefined motor: 165 hp and 135 ft lb torque from a 2-valve-per-cylinder pushrod motor. And all of that on their base model. You say unrefined. I say bravo.

Yes, Motus can't compete with global corporations who have been making motorcycles for over 50 years. But you cannot deny they have produced pretty spectacular results for a first effort. I get that not everyone is going to be impressed. I think that's a result of personal preference, not a result of Motus' design. Some people would rather drive a Z-car. Some people would rather drive a Camaro.
All of what you say is true and I wish them nothing but success. Having spent some time on one, however, they are not for me, even putting price aside.
Reply
#28
(07-07-2018, 03:21 AM)apex1_imp Wrote:
(07-07-2018, 01:24 AM)Roper_imp Wrote:
(07-06-2018, 10:23 AM)apex1_imp Wrote: I test rode one last year when the test ride fleet came to a local dealer which just picked them up. It was a pretty long test ride. I was unimpressed. It felt like a kit bike. A collection of top shelf parts bolted together around a loud, hot, unrefined motor with automotive peripherals. The lack of resources to manufacture their own fully-integrated components and to refine and integrate them is very evident. It is hard for me to believe that a Motus could ever put down the type of power that a modern liquid cooled high tech motorcycle engine can make.
The top shelf parts are the ones many cyclists use to replace the OEM stuff on their bikes, anyway--Ohlins suspension, Brembo brakes, braided lines, OZ wheels, Akrapovic exhaust. And their loud, hot, unrefined motor: 165 hp and 135 ft lb torque from a 2-valve-per-cylinder pushrod motor. And all of that on their base model. You say unrefined. I say bravo.

Yes, Motus can't compete with global corporations who have been making motorcycles for over 50 years. But you cannot deny they have produced pretty spectacular results for a first effort. I get that not everyone is going to be impressed. I think that's a result of personal preference, not a result of Motus' design. Some people would rather drive a Z-car. Some people would rather drive a Camaro.
The top shelf parts are the ones many cyclists use to replace the OEM stuff on their bikes, anyway--Ohlins suspension, Brembo brakes, braided lines, OZ wheels, Akrapovic exhaust. And their loud, hot, unrefined motor: 165 hp and 135 ft lb torque from a 2-valve-per-cylinder pushrod motor. And all of that on their base model. You say unrefined. I say bravo.

Yes, Motus can't compete with global corporations who have been making motorcycles for over 50 years. But you cannot deny they have produced pretty spectacular results for a first effort. I get that not everyone is going to be impressed. I think that's a result of personal preference, not a result of Motus' design. Some people would rather drive a Z-car. Some people would rather drive a Camaro.
All of what you say is true and I wish them nothing but success. Having spent some time on one, however, they are not for me, even putting price aside.

Well, judging from your stable of bikes, I'd say you have excellent taste (even if you don't care for Motus.) Cool
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  no more Motus motorcycles the Ferret 18 705 02-01-2021, 03:23 AM
Last Post: Charlie Bravo_imp
  Motorcyclist Magazine on Motus. redbirds_imp 3 221 09-22-2017, 02:00 AM
Last Post: bigsheep_imp
  Motus coming to N. Kentucky Stichill_imp 9 421 06-08-2017, 12:50 PM
Last Post: 4 Paws_imp
  Motus V4 DGShannon_imp 11 515 03-25-2015, 04:28 AM
Last Post: thessler3_imp

Forum Jump:


Users browsing this thread: 1 Guest(s)