Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Mystery 'R' pin
#1
Can someone please help me to identify this part - i found it on my truck bed floor by the rear wheel on the left hand side after carrying the bike 140 miles on very rough roads - the pin is 10mm long - have checked most of bike except under the side covers and injector covers.
John
Reply
#2
(09-21-2017, 03:50 AM)WK57ABF_imp Wrote: Can someone please help me to identify this part - i found it on my truck bed floor by the rear wheel on the left hand side after carrying the bike 140 miles on very rough roads - the pin is 10mm long - have checked most of bike except under the side covers and injector covers.
John
I just looked all over my 2014 standard and don't see one.



Sent from my SM-T710 using Tapatalk
Reply
#3
That's a hitch pin. Don't recall any on the CB, but I'll walk out to the garage and have a look around
Reply
#4
Retsel - thank you for looking - going dark now so will remove all covers in the morning and have a good look in there - went a short ride this afternoon and nothing fell off - 2013 CB1100A.
Reply
#5
Doesn't look familiar. Do you have a wheel chock in the back of your truck? Looks like it could have come off something like that.
Reply
#6
Ferret - this is a very small pin 10mm long - yes it is similar to a hitch pin in shape - but hitch pins are about 3'' long.
LongRanger - i doubt that its coming off anything but the bike - very sad, i keep everything in rubbermaid boxes - generator/portable winch etc in the truck bed.
Reply
#7
Did it come from the "stud" holding the foot peg ?
From the factory they have a split pin but that could have been replaced by a tiny hitch pin.
Reply
#8
Ferret's right - looks like the clip that holds pin that holds the hitch in a receiver.
Reply
#9
can you put something in the photo with it for scale?
Reply
#10
If it's anything from the bike, it's from the stud holding the foot peg on.
Look here:

https://www.google.com/search?q=CB1100+f...mLwRiiBBM:

But....that looks aftermarket. I don't think the stock pegs have that kind of pin.
http://www.cpuhunter.com/wp-content/uplo...Engine.jpg
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Mystery dent on frame? Should I be worried? bertypower_imp 14 889 10-04-2020, 02:41 AM
Last Post: bertypower_imp
  Mystery Solved rbike_imp 16 732 02-17-2016, 02:32 AM
Last Post: kennyw

Forum Jump:


Users browsing this thread: 1 Guest(s)