09-17-2019, 05:15 PM
hello again,sorry my late response.i take video of the bike.N never appear.this video taken with no side stand open.ready to run condition.
https://www.youtube.com/watch?v=ya9ezPhQCXw
hi Pekingduck,below is my vid on youtube.thank you.
Hi rocketz,
1 how did this problem start and
2 how did you find out that the neutral switch WORKS
3 it sounds as if the sidestand switch is not working , check for loose bolt on the switch and put sidestand in and out several times to re-activate the switch.
hi Maxx,i appreciate for your kind help.the bike is brand new.never run before.i had opened the front sprocket cover on left.i try to use multimeter to test neutral switch.seems work for me.pls advise.for sidestand i checked also using multimeter and it works.
please check my video : https://www.youtube.com/watch?v=ya9ezPhQCXw
thanks goldoxide.sorry for my bad english.
https://www.youtube.com/watch?v=ya9ezPhQCXw
(09-10-2019, 08:31 AM)pekingduck_imp Wrote: Hello Rocketz,
Would you please clarify some points to help with the diagnosis?
The yellow check engine light comes on when the key is turned on, but does it go out after the engine is running?
Also, when you started the engine, you pulled the clutch lever in?
hi Pekingduck,below is my vid on youtube.thank you.
(09-10-2019, 09:01 AM)max_imp Wrote:(09-10-2019, 01:55 AM)rocketz_imp Wrote: CB1100 2018 Neutral problem,green N light didnt lit up ,yellow check engine light on.gear indicator indicate -.bike can be start up but when put on first gear engine cutted off.
clutch switch works,side stand works,neutral switch works.what cause the engine cutted off?
Does anyone have service manual that i can ask for copy? thanks
Hi rocketz,
1 how did this problem start and
2 how did you find out that the neutral switch WORKS
3 it sounds as if the sidestand switch is not working , check for loose bolt on the switch and put sidestand in and out several times to re-activate the switch.
Hi rocketz,
1 how did this problem start and
2 how did you find out that the neutral switch WORKS

3 it sounds as if the sidestand switch is not working , check for loose bolt on the switch and put sidestand in and out several times to re-activate the switch.
hi Maxx,i appreciate for your kind help.the bike is brand new.never run before.i had opened the front sprocket cover on left.i try to use multimeter to test neutral switch.seems work for me.pls advise.for sidestand i checked also using multimeter and it works.
please check my video : https://www.youtube.com/watch?v=ya9ezPhQCXw
(09-10-2019, 12:16 PM)GoldOxide_imp Wrote: An inconvenient circumstance for a maiden Forum opener.
Nevertheless, some helpful responses from members. Hopefully the issue is something simple.
thanks goldoxide.sorry for my bad english.

