12-19-2020, 04:10 AM
This was exactly it. After flipping the kill switch about 50 times I finally heard the fuel pump activate and it cranked instantly. How hard was it to disassemble and clean?
He GeorgiaRider,
I and a few others have had a problem with an intermittent kill switch (mine left me stranded on the side of the highway). The obvious issue is that you don't hear the fuel pump cycling when you turn the key. In my case, even after cycling the switch a few times, I still wasn't hearing the fuel pump. It eventually had to be disassembled and cleaned up.
The way to find out if the kill switch is the culprit is to watch the lights when you turn the key. Normally, this causes the oil temp, oil pressure and check engine lights to come on. After a few seconds, the oil temp and check engine light should turn off.
If the kill switch circuit is activated, after turning the key you'll hear no fuel pump activation and the oil temp and oil pressure lights will come on (NO check engine light). Both of the lights will remain illuminated.
It's a quick and easy test to elimate or pinpoint the kill switch circuit as the issue.
(12-18-2020, 09:10 AM)Flynrider_imp Wrote:(12-17-2020, 01:50 PM)GeorgiaRider_imp Wrote: Thanks guys for the feedback. The kill switch is the first I double checked ... and in neutral with green N light on. I’ve tried all the normal things. I’m going to get a charger on it tomorrow and see if that does the trick.
He GeorgiaRider,
I and a few others have had a problem with an intermittent kill switch (mine left me stranded on the side of the highway). The obvious issue is that you don't hear the fuel pump cycling when you turn the key. In my case, even after cycling the switch a few times, I still wasn't hearing the fuel pump. It eventually had to be disassembled and cleaned up.
The way to find out if the kill switch is the culprit is to watch the lights when you turn the key. Normally, this causes the oil temp, oil pressure and check engine lights to come on. After a few seconds, the oil temp and check engine light should turn off.
If the kill switch circuit is activated, after turning the key you'll hear no fuel pump activation and the oil temp and oil pressure lights will come on (NO check engine light). Both of the lights will remain illuminated.
It's a quick and easy test to elimate or pinpoint the kill switch circuit as the issue.
He GeorgiaRider,
I and a few others have had a problem with an intermittent kill switch (mine left me stranded on the side of the highway). The obvious issue is that you don't hear the fuel pump cycling when you turn the key. In my case, even after cycling the switch a few times, I still wasn't hearing the fuel pump. It eventually had to be disassembled and cleaned up.
The way to find out if the kill switch is the culprit is to watch the lights when you turn the key. Normally, this causes the oil temp, oil pressure and check engine lights to come on. After a few seconds, the oil temp and check engine light should turn off.
If the kill switch circuit is activated, after turning the key you'll hear no fuel pump activation and the oil temp and oil pressure lights will come on (NO check engine light). Both of the lights will remain illuminated.
It's a quick and easy test to elimate or pinpoint the kill switch circuit as the issue.