06-30-2022, 02:02 AM
the stator cover on my XL 350 is held on by 3 screws. one came out other 2 are frozen
this bike is an orphen that came to me form Denver. it has been sitting from mid 80s
the heads are a bit messed up so i tapped them down sprayed penetrant and let them sit then used JIS hand inpact driver, no luck. loooking at the one that came out if i dril the head it will not leave me but 2 threds to grab and not wanting to damage the magnisum cover i needed a better plane.
i took a small drill bit drilled a hole clean thru then used a inslin syringe to squirt penetrent down the hole let it sit for 2 days smacked them and out they came
![[Image: d7cd762c6c9b81e683a3cd0db5797e26.jpg]](https://cb1100forum.net/forum/uploads/imp/202206/d7cd762c6c9b81e683a3cd0db5797e26.jpg)
this bike is an orphen that came to me form Denver. it has been sitting from mid 80s
the heads are a bit messed up so i tapped them down sprayed penetrant and let them sit then used JIS hand inpact driver, no luck. loooking at the one that came out if i dril the head it will not leave me but 2 threds to grab and not wanting to damage the magnisum cover i needed a better plane.
i took a small drill bit drilled a hole clean thru then used a inslin syringe to squirt penetrent down the hole let it sit for 2 days smacked them and out they came