09-25-2022, 10:54 AM
You may find my thread on re-setting the ECU. Basically, you remove both the positive and negative leads from the batter and connect them together without letting them touch the battery poles. I use a wire with alligator clips on each end. I remove the battery from the bike just to be sure they don't touch the battery poles. Leave the leads connected for about 15 minutes. Take the dog for a walk, drink a cup of coffee or check the new posts on the Forum. Then put everything back together. You might find that the fast idle/unstable idle problem is much improved. This points to the ECU. I had excellent success with this, but I am installing a new ECU to see if that is the answer. It worked for Empty Sea and a couple of others. It should be easier and a little less expensive and more effective than replacing the IACV. We will see.