Anyone ever use these Noco lithium Batteries?

[satchit]

so if I am reading your post right, the jump starter won't hook up to an existing battery tender jr lead. you have to use or ADD the Norco lead in order to be able to jump start the bike

Correct. A standard cable won't handle the jump starter current - I kept blowing the fuse on the charging cable till I realized there is way more than 10 amps flowing from the jump starter.

will the Norco lead plug into the battery tender jr and function properly?

I don't worry about it on my CB, but the NC DCT and my wife's X Max, neither of which can be bump started

The gbc-007 cable I mentioned above comes with a adapter to attach to NoCo's chargers.
To connect to a standard sae adapter, you would also need to get https://no.co/gc009.

The adapters can be removed and added as necessary.

To use a sae charger...
Battery --> 'NoCoJumpStarterCable' --> 'BoostToXConnectAdapter' --> 'XConnectToSaeAdapter' --> 'SAECharger'


To use a NoCo charger...
Battery --> 'NoCoJumpStarterCable' --> 'BoostToXConnectAdapter' --> 'NoCoCharger'


To use NoCo jump starter...
Battery --> 'NoCoJumpStarterCable' --> 'NoCoJumpStarter'