09-15-2024, 12:16 AM
There is no fuel bleeding needed.
OK, assuming you have everything hooked up correctly, you may have mashed the vent line when you replaced the tank. Wouldn’t be the first time it’s happened.
You can open the fuel cap and see if the bike runs ok. If so, then you just find where the vent line is pinched.
OK, assuming you have everything hooked up correctly, you may have mashed the vent line when you replaced the tank. Wouldn’t be the first time it’s happened.
You can open the fuel cap and see if the bike runs ok. If so, then you just find where the vent line is pinched.
