05-22-2017, 12:52 PM
Have you purchased a shop manual for it yet? You have the '14 standard and it's spelled out on pages 2-23 and 2-24.
In summary, it says to remove the muffler guard, remove the main spring, remove the sub spring and then remove the spring plate. Remove the pivot pipe while holding the centerstand, then remove the centerstand from the frame.
In your case, it goes on to say that installation is in the reverse order.
Take note to install the springs with the large hook side facing up. Apply grease to the pivot pipe and replace the pivot pipe mounting bolt with a new one. Torque the mounting bolt to 9 ft-lbs.
Lastly, make sure it retracts smoothly.
In summary, it says to remove the muffler guard, remove the main spring, remove the sub spring and then remove the spring plate. Remove the pivot pipe while holding the centerstand, then remove the centerstand from the frame.
In your case, it goes on to say that installation is in the reverse order.
Take note to install the springs with the large hook side facing up. Apply grease to the pivot pipe and replace the pivot pipe mounting bolt with a new one. Torque the mounting bolt to 9 ft-lbs.
Lastly, make sure it retracts smoothly.