03-07-2025, 01:32 AM
Welcome to the forum, Skansenwagon.
It looks like you have a 2017EX with spoked wheels.
My sprockets, chain and #1 rubber damper set were both replaced at around 60K km with some wear.
https://www.hondapartshouse.com/oemparts...ar-wheel-1
I currently have 132k km and have never replaced the clutch slave cylinder.
When working on the front sprocket you will need to remove #26 three long M6x75 bolts which hold down the slave cylinder. Do not use a gun and torque them to specs.
https://www.hondapartshouse.com/oemparts...case-cover
It looks like you have a 2017EX with spoked wheels.
My sprockets, chain and #1 rubber damper set were both replaced at around 60K km with some wear.
https://www.hondapartshouse.com/oemparts...ar-wheel-1
I currently have 132k km and have never replaced the clutch slave cylinder.
When working on the front sprocket you will need to remove #26 three long M6x75 bolts which hold down the slave cylinder. Do not use a gun and torque them to specs.
https://www.hondapartshouse.com/oemparts...case-cover
