02-01-2015, 01:51 AM
I am 6'1" with 34" inseam and the stock saddle slid me forward making the pegs more rearset. First, I added the K&H Solo seat which keeps me position aft a little better. The foam is also firmer, so I don't settle in as much. I was going to get the K&H double high saddle, but was afraid I would feel like I was on top of the bike more than in the bike. Lower bars also increase the sensation of being on top of the bike.
Most recently, I added some TSR Sport pegs advertised as 10mm up and 10 mm back. While on paper they should have caused a more cramped position, they actually feel roomier. The stock pegs are so wide compared to these, my boot heels actually fit further down around them. I had to readjust my shifter linkage to lower the shifter some.
For someone well into the 6 foot range or with 34"+ inseam, small changes in seat height and peg positioning can make a world of difference.
Most recently, I added some TSR Sport pegs advertised as 10mm up and 10 mm back. While on paper they should have caused a more cramped position, they actually feel roomier. The stock pegs are so wide compared to these, my boot heels actually fit further down around them. I had to readjust my shifter linkage to lower the shifter some.
For someone well into the 6 foot range or with 34"+ inseam, small changes in seat height and peg positioning can make a world of difference.