03-28-2016, 03:33 AM
Spent the last 2 Sunday's detailing the bike. So a few questions...1.) Had some surface spots (pitting?) on the chrome part of the turn signals, hose clamps to radiator, some bolts on the front of the bike and also the black spacers on the front of the bike between the frame and motor. I used Eagle One's Nevr-Dull (see below) on the chrome which I've had good success on past bikes however, I couldn't get the bolts and spacers free on pitting so I ended up using on them as well. Anyone have a better suggestion because the Nevr-Dull isn't suppose to touch lacquer and it's nearly impossible not to hit some of the painted areas while cleaning the bolts and spacers. 2.) What do you use on the seat vinyl? I've tried soap and water but it's dull--doesn't look close too new. I thought about Armor All but I don't want to slide around on the seat.
I'm not usually this anal about taking care of my stuff however, I found with bikes it's easier to maintain than restore back to new-- if you let such things go for over a year you are screwed.
I'm not usually this anal about taking care of my stuff however, I found with bikes it's easier to maintain than restore back to new-- if you let such things go for over a year you are screwed.