08-07-2016, 01:43 AM
Correct me if I'm wrong, but the hardware consists of 4 bolts longer than the original 4 bolts. When you remove the rack, you are going to need the stock bolts (which are shorter). You can't put the garnishes back on until you've got those 4 bolts and if you can't put the garnishes on you can't put the turn signals on and hence can't ride anywhere.
On the parts diagram posted above by popgun (which I am placing immediately below for convenience), it looks like you'll need 2 of part #15 and 2 of part #17 plus, if you don't have them 2 of part #1 and 4 of part #4.
http://www.partsfish.com/oemparts/a/hon/...a7a/seat-2
It's different for the 2013 STD, and simpler.
http://www.partzilla.com/parts/search/Ho...parts.html
I just needed to order 4 of part #11.
On the parts diagram posted above by popgun (which I am placing immediately below for convenience), it looks like you'll need 2 of part #15 and 2 of part #17 plus, if you don't have them 2 of part #1 and 4 of part #4.
http://www.partsfish.com/oemparts/a/hon/...a7a/seat-2
It's different for the 2013 STD, and simpler.
http://www.partzilla.com/parts/search/Ho...parts.html
I just needed to order 4 of part #11.