09-19-2016, 12:36 AM
Headlight vibration rattle is really annoying at higher rpm, even worse when using a wind screen on this bike. As another forum member mention in a earlier post that the cure was to wrap the wire harness inside the headlight shell with some kind of insulated tape. This does work and cuts down about 80% of the noise. But I still had a slight rattle, even though everything was wrapped well. Well I finally found the culprit making the last of the 20% noise. It was the SPRING on the adjustment screw of the headlight, inside the shell. Wrapped it with insulated tape and silence at last.
