12-28-2017, 05:33 AM
(12-28-2017, 01:41 AM)use2b_imp Wrote: I have the chrome end weights that i took off and put closed end old style grips on my bike. I did not take the inside attachment out and will not go back in . I do not have the buz , feels like a smooth 4 cly should.
Novice question here - what is that adjustable thingy bottom front right side that looks like it may be a counter balancer ?
To answer your question; yes it is, made a video that includes the adjustment, normally not required but if you have a rattle in the lower crankcase it may snug it up.
Mark or photograph the original position, loosen the 10 mm bolt that is the clamp part ( the lower one ) until the shaft rotates, slowly rotate to the left with the engine running until there is a distinct whine audible, go back to the right until it clears and go another notch further before locking the clamp again without overtighning it.
Like this; https://www.youtube.com/watch?v=mEgQmyknW_4
cheers max