03-18-2018, 03:22 PM
Having seen a K&N filer that failed on Pterodactyl's CB1100, I will never have another one.
Flytech, I have a recollection that K&N says you must not tighten the filter with the nut; it is there for removal only.
(03-18-2018, 11:37 AM)Flytech99_imp Wrote: I used the K&N on a previous HD with no issue.... The little nut made it super easy to get on and off since the filter was mounted sideways in front.
For the CB though, it's a Honda filter all the way. Get a good 65mm oil filter cap wrench and it's a piece of cake!
Flytech, I have a recollection that K&N says you must not tighten the filter with the nut; it is there for removal only.

