Accessory Install: SW-Motech Top Case

[rdprdp01]

There is a great convenience factor that happens when you equip your motorcycle with luggage. For the kind of riding I do, a SW-Motech Urban Top Case is a great fit. I documented in the following Thread why I selected the SW-Motech Urban Case and what it has enabled for me:

https://cb1100forum.net/forum/showthread...#pid270379

For those interested in doing your own install work, this Thread documents the installation process.

Step 1: Receive the Top Case and inspect the box for any sign of damage. All SW-Motech Products are manufactured in Germany and shipped. Check for any impact damage and take pictures if something is found:



Step 2: Carefully unpack the Top Case. Note that SW-Motech is a world-class supplier. Be careful with box cutters and blades. Everything is tightly packed to reduce damage and weight. Be careful while using a blade to open a box or pouch:



Step 3: Inspect the Top Case and all of its components. Review the installation documentation to confirm that everything has shipped and has arrived without damage:





Step 4: Prepare and organize your work area. You will need a torque wrench to complete the installation properly:



Step 5: Review the instruction instructions and organize your parts staging such that your parts align with each step.





Step 6: Open the case and flip up the inner lining so you have clear access to install the form rubber base and stabilizing cover plate. Use a standard driver for feeding the screws and then use a torque wrench to tighten all screws to 2.5 N-m. Follow the instructions carefully to ensure that all spacers are installed properly. Those spacers will ensure a snug fit and prevent noise and vibration. When everything is torque properly, then install the screw covers and return the inner lining to the "inside" of the Top Case.











Step 7: Attach the straps to the top case:



Step 8: Secure the Top Case to your seat or rear carrier using the straps. Note that straps should be snug but not stressfully tight. The Top Case sits well on a CB1100 and will not shift as long as the four corners of the Top Case are securely strapped to the mounting posts on the motorcycle.