Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Dart developing flyscreen for CB1100
Author Message
ChipBeck_imp Offline
Road Warrior


Posts: 784
Threads: 29
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Apr 2013
RE: Dart developing flyscreen for CB1100
#15



(07-13-2013, 02:27 AM)Scoobynut_imp Wrote:
(07-12-2013, 07:34 PM)ChipBeck_imp Wrote:
(07-12-2013, 10:17 AM)Scoobynut_imp Wrote:
(07-12-2013, 09:02 AM)ChipBeck_imp Wrote: I should have known better. Yeah I was talking about the 650 and even though you posted W800 I wasn't sharp enough to realize it was a new bigger engined model. I stand corrected. You can probably answer another question. My objection to the shaft can drive wasn't it's looks, it was that the original Bonneville's didn't have that. I know another vintage bike did. What was it??

Chip

I'm not sure if we're playing trivia now, or if you just don't know! Big Grin I'm not sure about any parallel twins that might've had the bevel drive, but I know classic Ducatis did at one time.

As far as the Bonnies not having the bevel drive, well, even the old W series Kawasakis in the 60s didn't have it, so who knows why Kawi incorporated it into the W650/800. I'd like to think so they could one-up the new Bonnie when it came out, but that's just what I'd like to think...

I didn't know and couldn't find a British bike with a shaft (bevel) driven camshaft although I could have sworn I'd seen one in the past. I knew Ducati used them. It was bugging me so I did a little research and finally found it. The bike photo I saw a long time ago was a late 1940's to early 1950's Norton 500cc single which had a bevel drive on the right hand side of it's cylinder.

Chip

I didn't know and couldn't find a British bike with a shaft (bevel) driven camshaft although I could have sworn I'd seen one in the past. I knew Ducati used them. It was bugging me so I did a little research and finally found it. The bike photo I saw a long time ago was a late 1940's to early 1950's Norton 500cc single which had a bevel drive on the right hand side of it's cylinder.

Chip
I vaguely remembered something along those lines, but had no idea it was a Norton single.

Took a while but I found a decent photo of one. This is a 1951 Norton 500cc single. A pretty good looking bike. I bet one of these would cause quite a stir if you rode to your local "Cars & Coffee" on it.

[url=http://s288.photobucket.com/user/chipbeck/media/Norton.jpg.html][Image: e2e4774e6a9b04b7425f45fd872e238e.jpg]


07-13-2013, 03:21 AM
Find Reply


Messages In This Thread
RE: Dart developing flyscreen for CB1100 - by ChipBeck_imp - 07-13-2013, 03:21 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Dart flyscreen and a little Yoshimura stain magic 1985CB450_imp 19 1,708 10-24-2022, 04:12 AM
Last Post: 1985CB450_imp
  Dart Marlin Flyscreen - A Quick Review the_undecider_imp 70 5,685 12-10-2019, 02:16 PM
Last Post: jimgl3_imp
  Clip-ons and Flyscreen. kmoney_imp 17 1,194 11-14-2019, 08:14 PM
Last Post: Moe_rider_imp
  Dart flyscreen and MPG rickcb 3 359 06-24-2019, 08:05 PM
Last Post: Rocky_imp
  Dart Marlin Fly screen Ennsync_imp 19 1,256 12-26-2018, 02:51 AM
Last Post: GoldOxide_imp
  Dart Screens For 2017 EX & RS 2017EX_imp 35 2,299 12-11-2018, 01:53 PM
Last Post: GoldOxide_imp
  Dart Fly screen chandler_imp 6 446 11-03-2018, 11:22 AM
Last Post: Doug Shepard_imp
  Could someone help me with my Dart flyscreen, please! Olyrider 6 568 09-04-2018, 01:24 PM
Last Post: SportsterDoc
  Dart Flyscreen regularworkingdad_imp 15 985 08-27-2018, 10:04 AM
Last Post: the Ferret
  Dart flyscreen gift booboo Archie_imp 5 477 03-23-2018, 07:09 PM
Last Post: larryblag_imp

Forum Jump:


Users browsing this thread: 1 Guest(s)