SW Motech crash Bars, Honda Metal polish .

[wildezt_imp]

wanted to share info on the bar on my bike (per Paul's request), and results of honda metal polish on the headers..

heres the SW Motech crash bar for the CB1100 I am so far happy with them, they are very inconspicuous and blend in to the frame:-


pricing info & shots from other angles can be found here, they are authorised dealers for it..piece of advice after ordering from them though is, follow up with them as they kind of have the tendency to mess up their inventory handling sometimes..:-
[url=http://www.twistedthrottle.com/sw-motech-crashbars-engine-guards-for-honda-cb1100-13]http://www.twistedthrottle.com/sw-motech-crashbars-engine-guards-for-honda-cb1100-13

I tried the cheap honda metal polish that comes in the tubes(I bought at the Honda dealer) with a couple metal polishing rags from autozone. I must say the polish dint even scratch the headers a bit (I kept the rag moist with the polish while rubbing and was careful not to use much force) and then wiped clear with another polishing rag.
These were the tools:-
[url=http://s1317.photobucket.com/user/wildezt/media/tools_zps1eae9646.jpg.html]

and this is how the output looked like without much effort.(ps: Icouldnt get to all areas with my xl hands ) but tried to run the rag around and did some see saw action which worked pretty ok I guess:-
[url=http://s1317.photobucket.com/user/wildezt/media/elbow_grease_zps93d837ca.jpg.html]