Had to add gaiters!!

[Ridem32_imp]

I'm not taking off the reflectors from the fork tubes I like them.
Take out one fork tube at the time that way when you back in you can keep it same height as the other in top triple tree. Look good at the sensor for abs before removeing it & the little holder both 8mm socket. When you pull the axle out the right side of wheel will drop enough to get sensor out from behind the bracket don't remove the bracket, when going back together leave the right side of wheel down and put sensor back in then line up axle and push axle in. As most of you know don't pull brake lever in with calipers off. When you put calipers back on and mounted pull the lever in a couple of times to have brakes. You don't have to bleed brakes. I pulled the fender out the front with it dropped down down on top of tire. Forks will slide right out when you losen the the 2 bolts on top and lower triple tree! It's all easy just take you time. Took me about a hour. Hope this helps
Michael

my gaters are en route, I'm going to do the lazy guy install - cut'em and velcro them back

I'll post pics if it works, if it doesn't I'll swiftly delete this post hehe

Did you get the same gaiters that I got? Don't cut them. It's easy to do about one hour 22mm socket 12& 14 socket. 6mm Allen and 5 mm Allen wrench. If you need help you can call me and I can talk you thru it. For real I would not cut them.
Michael

Good job Ridem! Anything tricky in the process? Any special tools required?

Man your bike looks good! Mine will look like that someday

Thanks ferret. Only trick is the abs sensor it comes off easy 2 8mm bolts one 8mm holding the bracket wire all that's easy but with axle still in place the sensor want come out passed the sensor wheel. You will see when you do it! When you take axle out slow that side of wheel will drop then sensor will clear the sensor wheel. Go back together the same way. I do like them! When we get ready to paint our headlight buckets I will give my buddy a heads up if anyone else wants the buckets painted to match let me know and he can do all at once. We can also do the air box sides if people want them done. He has the 13 glory red perfect match because it's the same as my 79 cbx. I will go by his shop and let him match the 2014 red to my side cover. I will try to start a post about red headlight buckets & air box covers and get a list from everyone who wants them done he can do the 13 side covers as well
Michael
http://www.ebay.com/itm/191140303530
This is candy glory red I got 4 sets and 2 more getting painted now