Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Yoshi vs Stock
Author Message
davidsargee_imp Offline
Been There


Posts: 393
Threads: 6
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Sep 2013
RE: Yoshi vs Stock
#9



(05-14-2014, 08:54 PM)CIP57_imp Wrote:
(05-14-2014, 01:00 PM)davidsargee_imp Wrote: Just watched them, CIP57. Yoshi definitely quicker, I timed them for the fun of it and got the same as you, 8.0 and 9.1. Don't need a timer to see the improvement with the Yoshi, you got to 100mph in a flash, in fact I was surprised just how quick it happened.

I can't wait to see a quarter mile time without the speed limiter, this bike should run low 11's without breaking a sweat. With the Yoshi exhaust and improvements to the airbox/filter for better breathing your bike is potentially a 10 second CB1100. Cool.

The Yoshi has a great throaty sound to it, very slight increase in DB.
When the bike is tuned correctly i can see it getting into the 10.90's with a professional mounted.


The Yoshi and Staintune slip ons are my favorite, they sound good but not loud.

10.90 is a very reasonable goal, the magazine ran 11.7 and was undoubtedly hitting the speed limiter with terminal speed of 110 and some change. I wonder how long the bike was topped out on that run. 10.9 would be a .8 second improvement, that's more than it sounds like, but definitely achievable. The ECU flash gave you some improvement beyond disabling the speed and rev limiters, (if I am reading y'alls posts right). With the pipe, and better breathing air box, you are probably very close, if not there.
You don't have to be a pure professional to make a good quarter mile run on this bike, I made some hole shots one day just to see how it feels. The bike will launch hard if you slip the clutch just right, piece of cake. The trick is to, for lack of a better term, go easy, slip the clutch just enough to get rolling before you fully disengage. Wasn't watching the RPMs but the bike seems to like quick shifting from 1st to 2nd, and not to redline in 2nd before shifting to 3rd. Don't want to lug it, but the bike is torquey enough to shift quickly to third and then just let it rip. (Just like your vids, Smile)


05-14-2014, 10:15 PM
Find Reply


Messages In This Thread
Yoshi vs Stock - by CIP57_imp - 05-13-2014, 03:13 AM
RE: Yoshi vs Stock - by shdwghst457_imp - 05-13-2014, 03:48 AM
RE: Yoshi vs Stock - by CIP57_imp - 05-13-2014, 03:50 AM
RE: Yoshi vs Stock - by shdwghst457_imp - 05-13-2014, 03:51 AM
RE: Yoshi vs Stock - by CIP57_imp - 05-13-2014, 03:59 AM
RE: Yoshi vs Stock - by shdwghst457_imp - 05-13-2014, 06:16 AM
RE: Yoshi vs Stock - by davidsargee_imp - 05-14-2014, 01:00 PM
RE: Yoshi vs Stock - by CIP57_imp - 05-14-2014, 08:54 PM
RE: Yoshi vs Stock - by davidsargee_imp - 05-14-2014, 10:15 PM
RE: Yoshi vs Stock - by CDN_RIDER_imp - 05-16-2014, 12:26 PM
RE: Yoshi vs Stock - by CIP57_imp - 05-16-2014, 11:42 PM
RE: Yoshi vs Stock - by Greg_imp - 05-17-2014, 02:43 AM
RE: Yoshi vs Stock - by CDN_RIDER_imp - 05-17-2014, 05:39 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Stock Mirrors MrBob_imp 5 529 04-11-2025, 03:33 AM
Last Post: balkanhound_imp
  Stock Exhaust Mod SStan11_imp 79 4,762 03-12-2025, 04:32 AM
Last Post: Charlie Bravo_imp
  Stock Muffler jbird06_imp 8 676 05-02-2024, 11:21 AM
Last Post: PowerDubs_imp
  Poking holes in a yoshi 3rdcoastcb1100_imp 6 549 06-24-2020, 05:19 PM
Last Post: treedoc_imp
  Decat stock pipes ozigoo 4 458 05-22-2020, 10:55 AM
Last Post: peterbaron
  Stock vs. aftermarket exhaust LongRanger_imp 15 1,012 11-30-2019, 06:30 AM
Last Post: GoldOxide_imp
  Shaved Stock or K+H Low GroovyBunny86_imp 18 1,400 06-18-2019, 12:58 AM
Last Post: BayAreaRick_imp
  Modify stock muffler? DBM_imp 2 321 07-30-2018, 05:08 PM
Last Post: FLYTYM_imp
  Anybody modify a stock 014' seat? el duque_imp 9 680 06-05-2018, 03:39 PM
Last Post: el duque_imp
  anybody have a carbon yoshi gtmn_imp 0 234 04-02-2017, 10:40 AM
Last Post: gtmn_imp

Forum Jump:


Users browsing this thread: 1 Guest(s)