SW-Motech Crash/Engine Bar Problem

[CB4ME_imp]

I didn't have any problems when I installed the SW Motech crash bars a couple weeks ago. Everything worked as advertised. No issues reusing stock nuts.

I'd get on the horn and have them send out the correct botls or new nuts asap. I would really be suprised in there were differences between the 2013 and 2014.

There are differences between the 2013 and 2014 when it comes to the rear carrier. Samurider lists the rear carrier for the 2014.

As far as the Fenda Extenda, on some bikes you need fastners. On the CB1100, use a good epoxy. I did and you'd have to cut the extensions off if you decided to remove them.