SW-Motech Crash/Engine Bar Problem

[Lord Popgun]

Rocky,

The Extenda DID come with little plastic push rivets that I wouldn't trust to hold anything. I, personally, used a marine adhesive. Others used an epoxy.

Gumby, if you search around you can find our threads on this.

And removing the fender is a good idea. It is easy and you can clean it properly and then do a nice job with the adhesive. I would advise scuffing both mating surfaces with sandpaper or whatever you think is good to make for a good bond. At least do the plastic and wipe both surfaces with a good degreaser (acetone will melt the plastic).