2014 Bread Loaf Seat on 2013 Frame

[jlhalsey_imp]

To those of you who have installed the 2014 "bread loaf" seat on 2013 bikes and found that it fits but the grab rails do not run parallel to the new seat, this can be easily corrected. There is a 2014 bracket that bolts to the original grab rail (garnish) rear retaining bracket which provides a second lower fastening point which provides the correct angle for the rail to run parallel to the 2014 seat.

The part numbers are 50168-MGC-N20 right side, 50169-MGC-N20 left side. you will also need two socket head bolts part number 90125-MJG-770 and two nuts 94050-08000.

if you would like to replace the painted grab rails with polished/clear coated rails the part numbers are 84110-MGC-N20 right, 84120-MGC-N20 left $57 ea at Procaliber. The two brackets are about $8 ea.

I will post a picture later today. Its a pretty easy install, even replacing the grab rails which requires unplugging the turn signal wires.