Carrier Rack Fitment Question

[Gumby 1100_imp]

Gary,

From what I have seen, the main difference in mounting racks on the EX/DLX and the Std is the angle of the Grab Rails. The Grab Rails on the Std angle upward at the back more than on the EX and DLX. The 2014 Std has basically the same geometry as a 2013.

Since the rack bolts through the grab rails, it should fit your Std, but the back of the rack may be angled skyward a little more than it would be on an EX. Some prefer that look as the rack will be further away from the tail light assembly.

If you look at the Webike ad for the Endurance Carrier Rack it states the following in broken English:
"CB1100 vehicles other than \ "EX \" if compared to the picture of the EX career a little back up installed will."

I believe that this is referring to the angle of the rack if installed on a Std.