Road Comet question...

[EGAlvarez_imp]

The unfinished, raw looking inside of my RC drove me absolutely crazy and I felt that is was unacceptable on a $500 bikini fairing. Since the inside is a rough fiberglass finish, I used flat black paint with a textured finish. I am very please with the results. Like any painting job, prep is critical. Invest the time to very carefully mask off the red edges with green frog tape.

Here's how mine turned out (The GPS has since been moved a little down and to the left as it was blocking the instruments and taking the key in and out of the ignition was a PITA with the GPS in the way)





Frog Tape:


I used this textured finish paint, but in black:


Good luck!
Eddy