Emgo Exhaust??

[mgoodie_imp]

I didn't reuse the gasket. Won't come out of stock muffler. I can order a new gasket and that will take up some of the slack. The adapters provided won't fit. They are too big to fit. My connector Pope from the Yoshimora won't work either. Tried them all. The adapter provided may work if I pound the crap out of the opposite side with a rubber mallet and covered with a towel. Still can be worked out. Just need to think a little. I wonder what mgoodie did. He didn't explain his install with many details at all. That crush gasket may be all I need. Dsinned. Let me know how you make out.

Sent from my SM-G530T using Tapatalk

Mine literally Just bolted right up, I think I used an adapter that came with it but I never had any issue with the supplied clamp or adapters.
Its been awhile since it did it but if I remember correct I just removed stock muffler and slid the emgo on the stock mid pipe. It stuck out to the side just a bit but it looked fine for me. The clamp that came with the emgo worked fine I think I did use an adaptor that came with the emgo and when installed and tightened down It was not moving nor did it ever leak. I bolted the hangar to a bolt that held the brake caliper on to the swingarm, this did take a small bend in the hanger to make it work and be able to tighten fully. In the end after a year and a half with it, it never moved/caused any trouble looked like new and it did get a bit louder as it broke in but I like loud so I was happy.