EOT meter for OEM oil cooler

[Lord Popgun]

Elipten, here are the details of the Spal fan I'm using: http://www.spalautomotive.com/eng/produc...7-A101-46S

And here are the details of the American Volt thermostatic temp sensor: http://www.amazon.com/American-Volt-Elec...FTVRZEKRDG

And the On/Off handlebar rocker switch: http://www.amazon.com/Motorcycle-Univers...Z6MSH2X4WX
popgun, that's true, but the fan running after shutdown also moves a lot of air behind the cooler in and around the front of the engine. Not a lot, but enough to aid in cooling down the heads and exhaust ports. E.g., on my other bike with a fan, I am able to touch the header pipes without burning my fingers within minutes after engine shutdown. This is because of the rapid cool down effect of the fan. This comes in handy when its time to change the oil and filter.

Yes you are right. I didn't think about that. Should have though. Lots of times I park my bike in the garage and put a fan, sometimes 3, on it to aid in cooling.
Ferret, I've read of HD shutting down the rear cylinder too. Plus, you can get the 'parade fan' option from HD or from aftermarket sources.
Ferret, I've read of HD shutting down the rear cylinder too. Plus, you can get the 'parade fan' option from HD or from aftermarket sources.