ecu/knee pads

[2017EX_imp]

Southwind, there are several different ways you can do the tank pads, depending on what you like. I believe the pattern Rocky mentioned is here: http://cb1100forum.com/forum/showthread.php?tid=11249 .

TechSpec precut pads for 2013-2017 CB can be found here: https://techspec-usa.com/products/gripst...grips.html . One of the supposed benefits of the TechSpec is that the adhesive on the back is peel off and re-position/re apply, or peel off/leave off without leaving adhesive residue behind. TechSpec also sells the material un cut, so you can use whatever pattern you like to create your own pads. "Universal" Honda pads are also offered at TechSpec, and no brand universal on EBay.

The last option that comes to mind is to use the pattern Rocky used, or make your own pattern, then take the pattern to an automotive window tint shop. Most of these shops now do "Clear Bra" paint protection film on cars as well. The shop could then use your pattern to cut and apply clear paint protection film to your tank. Sometimes these shops will say they can cut the film to custom fit while it is on the vehicle, but that risks cutting into the paint, depending on the skill of the technician. So, the only way I would do the clear film option is if it is pre cut from a pattern.