Arro Exhaust headers / collectors

[rusty1_imp]

Well jf coastal I am a very busy guy a get to this forum when a can. The thing I do to all the pipes I have installed [in my time as a motorcycle wrench 100+ pipes] is very simply get some grease put some in the exhaust port about 1/4 inch thick around the hole and about a 1/4 thick down the header pipe as far as you can with a stick or screw drive, start the bike and let motor run real slow [about 10mins], it will start to smoke like 10 cars doing a burn out, then ride it real slow for about 10 to 15 miles.It smoke real bad and stink. But no blue pipes, carbon is the best insulator you can get.
san pete one bike, I have blue tank and black side covers that comes stock on the Canadian model. The red tank and side cover are Ryujin paint job I got from MR T. The first one into North American. I do ride it with blue tank some times and red one some times as well, the pic's of the red bike is in my basement of my house and the blue pic's are of my garage. As you can tell I do love the two wheel fun.
These are two of my fun old bikes