anyone manufacturing race inspired fairings/cowls?

[pekingduck]

The Airtech fairing is a fairly large one - early CB750s were large bikes, and the engines is about the same width at 21"-22" as the CB1100. I've seen a Kaw Z-1 900 and a Benelli 6 with this fairing.

Airtech makes race-replica parts, and is pretty much where everyone goes. In the era before fairings became standard, everyone adapted fairings from other models. These are about as inexpensive as you'll find at about $280. Also check these:

http://www.airtech-streamlining.com/vint...gsfull.htm