full delkevic exhaust

[mvk24_imp]

so i guess this is how these delkevic exhaust fit ! Not very good! It looks like the whole thing should have had a little more bend in it and about an inch or so longer to allow the collector pipe to tuck up in place and line up to the mounting hole and still have the head pipes fit flush with the doughnut gaskets. I guess all i can do is snug the nuts down a little bit and see where it lies, then force it up a just a little bit and make a litle pc to connect them together. Kind of disappointed they couldnt have made these things fit better.

Photos? Exhausts can be a pain to install sometimes. After a little massaging and jiggling they may fit better

Also sounds silly but make sure one of the original exhaust gaskets at the headers isn't in there still and then you're trying to push the new gasket on the new headers against it. That could be messing with your inch of length if the headers arnt all flush in the manifold.

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca