full delkevic exhaust

[outback_imp]

Fwiw, using the stock o2 sensor will yield the best and most reliable results. You won't get real power gains without digging into the airbox and all that good stuff, so using the PCV is only going to cause you to burn more gas unnecessarily. If you can get the gnarly noise and keep your fuel range intact, that's a win.

Thats good to know. It seems to use enough gas as it is. I guess i was under the impression that if you install a full exhaust on one of these new fi cb1100 bikes you had to run the pcv to keep it from running too lean. Hopefully delkevic did thier homework and put the bung where the stock 02 sensor cable will reach.
Thanks again for all your help, These new fi bikes is all new to me.