Flipping the handle bar mounts around

[1985CB450_imp]

Well in my quest to get the bars as low and far forward as the stock mounts/tank will allow I decided to swap the bar mounts around as they have a pretty good offset

I had already switched out the stock bar on my 2013 for an Emgo 7/8 Superbike bar

Here is the Superbike bar with stock mount orientation



Same bar with the mounts flipped





By getting the bars just a little more forward I was able to rotate it more rearward giving it a perfect angle at the grips and plenty of tank clearance. Very happy with the end result

Below shows tank clearance at full lock