Spare connectors/Oxford heated grips

[Lord Popgun]

First, I made a mistake. My diagrams say CB1100 (After ‘13 model), CB1100A (After ‘13 model) and CB1100SA (After ‘13 model). The A is an ABS model and the SA is the DLX

Anyway, on the wiring diagram the connectors at the top on the right and left. The rear one is top right labeled Option-Dummy (dummy is the cap) and WPC 4P ® The R means red. 4P means 4 pins.

The one in the headlight shell is top left under the switchgear labeled Option-Dummy WPC 2P ® 2P means 2 pins.