09-17-2023, 09:19 AM
(09-17-2023, 08:21 AM)Lord Popgun_imp Wrote: Are you SURE the known relay is good? Put 12v (and ground) on the coil and ohm out the contacts for continuity. At work we see even new ones not work sometimes.
Might be a not good connection? Check the connectors. Make sure the pins are locked in and not pushed or anything.
For now thats all I got.
Thanks Lord,
We swapped the horn relay with the lighting relay as the lights are all working. Both relays are the same P/N. Still no difference. You do make a good point about the contacts in the relay box. They visually looked intact, but I kind of thought they looked a little low in the plug. So it very well could be that when plugging in the relay, it presses the connectors out of the bottom. We'll pull the tank back off next weekend and pull the relay box just to make sure.